left right

Dobrodošli na Player e-shop!

Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


HS 2000

Šifra Proizvoda: 85728

Napiši prvi komentar za ovaj proizvod



Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:

ili emailom:

Kratak opis

The HS-2000 is Tascam’s studio solution for professional stereo recording and playback based on solid-state media. The HS-2000 includes SMPTE timecode and all connections required by professionals including RS-422 serial control. Also true to Tascam tradition, audio is top-quality throughout with up to 192 kHz / 24-bit recording formats available.

Pogledaj proizvod iz više uglova:

*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

Audio files are created on secure CompactFlash media in Broadcast WAV format, and since a pair of CF card slots is available, data mirroring or extended recording times are possible. A remote control available as an option allows flash start operation from a separate room over RJ-45 connection.

The HS-2000 is the ideal solid-state recorder for professionals, with the instant access, ease-of-use and sound quality recording, broadcast and post production studios demand.

Main Features

  • Differences to HS-2 are marked in red
  • High-quality stereo audio recorder for professional broadcast and recording applications
  • Two operation modes:
    • Timeline mode: Use the unit like a tape recorder
    • Take mode: Record/play separate audio takes, use playlists and flash start
  • Ideal replacement for current DAT, MD, MO or other recorders
  • Fast boot time
  • Easy to read and operate through TFT colour touch screen interface
  • Dual CompactFlash slot with UDMA support
  • Mirroring and continuous recording between two CFs
  • Uses broadcast wave format (BWF) with mark function
  • Sample rates: 192/176.4/96/88.2/48.048/48/47.952/44.1 kHz at 16/24-bit resolution
  • Pre-recording up to 5 seconds (audio is captured before the record button is actually pressed)
  • Flash start with optional flash start controller RC-HS20PDor RC-SS20
  • Locate marker function (auto/manual)
  • Online function with dedicated outputs for pre-listening and on-air playback
  • Confidence monitoring
  • Editing fuctions (divide, combine, erase)
  • Projects can be exported in AES31 format
  • Auto Cue, Auto Ready, Incremental Play and Repeat
  • Playlist function
  • Jog/Shuttle function
  • 2U rack-mount size

Inputs and Outputs

  • Balanced analogue inputs and outputs (XLR)
  • Additional balanced monitor output (XLR)
  • AES/EBU input, main output and monitor output
  • Parallel control port
  • RS-422 serial control port
  • RS-232C serial control port
  • SMPTE Timecode input/output as standard
  • Word sync input/output (BNC)
  • Video sync input (BNC)
  • Gigabit Ethernet connection for data transfer or remote control
  • Remote connector for optional flash start controller
  • USB connector for data exchange with external storage devices
  • Computer keyboard (PS/2) connector for easy naming of files and folders


Recording media   Compact Flash cards
File system   FAT32 (4 GB or more)
FAT16 (2GB or less)
File formats   BWF (Broadcast Wave)
WAV (Waveform Audio)
Number of channels   2 channels
Quantization bit rates   16-bit, 24-bit
Sampling frequencies   44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
Timecode frames   23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF
Analog audio inputs and outputs
The error for nominal and maximum levels is ±1 dB for all input and output jacks except the PHONES jack.
ANALOG IN (LINE) connectors (L/R)   XLR-3-31 (1: GND, 2: HOT, 3: COLD)
  Input impedance   4.3 kΩ
  Nominal input level   +4 dBu (1.23 Vrms) ±1 dB or –20 dBu (0.0775 Vrms) ±1 dB (selectable)
(+6 dBu only when set to Max +15 dBu and Digital Ref. Level set to –9 dB)
  Maximum input level (selectable)   +15 dBu (4.36 Vrms)
+18 dBu (6.16 Vrms)
+20 dBu (7.75 Vrms) 
+22 dBu (9.76 Vrms) 
+24 dBu (12.3 Vrms) 
–6 dBu (0.388 Vrms) 
–4 dBu (0.489 Vrms) 
–2 dBu (0.616 Vrms) 
0 dBu (0.775 Vrms)
ANALOG OUT (LINE) connectors (L/R)   XLR-3-32 (1: GND, 2: HOT, 3: COLD)
  Output impedance   100 Ω or less
  Nominal output level   +4 dBu (1.23 Vrms) ±1 dB or –20 dBu (0.0775 Vrms) ±1 dB (selectable)
(+6 dBu only when Digital Ref. Level set to –9 dB)
  Maximum output level (selectable)   +15 dBu (4.36 Vrms) 
+18 dBu (6.16 Vrms) 
+20 dBu (7.75 Vrms) 
+22 dBu (9.76 Vrms) 
+24 dBu (12.3 Vrms) 
–6 dBu (0.388 Vrms) 
–4 dBu (0.489 Vrms) 
–2 dBu (0.616 Vrms) 
0 dBu (0.775 Vrms)
ANALOG OUT (MONITOR) connectors (L/R)   XLR-3-32 (1: GND, 2: HOT, 3: COLD)
  Output impedance   100 Ω or less
  Nominal output level   When reference level set to –9 dB:
+6 dBu (1.55 Vrms)
When reference level set to any value other than –9 dB
+4 dBu (1.23 Vrms)
  Maximum output level (selectable)   +15 dBu (4.36 Vrms) 
+18 dBu (6.16 Vrms) 
+20 dBu (7.75 Vrms) 
+22 dBu (9.76 Vrms) 
+24 dBu (12.3 Vrms)
PHONES jack   Standard 6.3-mm stereo jack
  Maximum output power   45 mW + 45 mW or more (THD+N 0.1% or less, into 32 Ω)
Digital audio inputs and outputs
DIGITAL IN [LINE] connector   XLR-3-31
  Input signal voltage amplitude   200 mVpp to 10 Vpp
  Input impedance   110 Ω ±20%
  Format   AES3-2003/IEC60958-4 (AES/EBU)
IEC60958-3 (SPDIF)
  Supported sampling frequencies   44.1/47.952/48/48.048/88.2/96/176.4/192kHz (single/double/quad) (47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
Note: When SRC is ON, the receivable range is 32–192 kHz.
DIGITAL OUT [LINE] connector   XLR-3-32
  Output voltage   2–5 Vpp
  Output impedance   110 Ω ±20%
  Format   IEC60958-4 (AES3-2003, AES/EBU)
  Supported sampling frequencies   44.1/47.952/48/48.048/88.2/96/176.4/192kHz (single/double/quad) (47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
Control inputs and outputs
RS-422 connector   D-sub 9-pin (female, inch-standard)
RS-232C connector   D-sub 9-pin (female, inch-standard)
PARALLEL connector   D-sub 25-pin (female, inch-standard)
Timecode INPUT connector   XLR-3-31
  Signal voltage amplitude   0.5–10 Vpp
  Input impedance   10 kΩ
  Format   SMPTE 12M-1999 compliant
Timecode OUTPUT connector   XLR-3-32
  Signal voltage amplitude   2 Vpp
  Output impedance   100 Ω
  Format   SMPTE 12M-1999 compliant
WORD/VIDEO IN connector   BNC
  Input voltage   5V TTL equivalent (WORD IN)
  Signal voltage amplitude   1 Vpp (VIDEO IN)
  Input impedance   75 Ω ±10%
  Allowable frequency deviation of external synchronization   ± 100 ppm
  Input frequency (WORD)   44.1/47.952/48/48.048/88.2/96/176.4/192kHz (47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
  Input signal (VIDEO)   24/25/29.97/30 Frame (NTSC/PAL Black burst, HDTV Tri-Level)
WORD/VIDEO THRU/OUT connector   BNC (OUT/THRU switch included)
  Signal voltage amplitude   5V TTL equivalent
  Output impedance   75 Ω ±10%
  Output frequency (WORD)   44.1/47.952/48/48.048/88.2/96/176.4/192kHz (47.952/48.048: 48kHz±0.1% pull-down/pull-up)
  Frequency stability   ±10 ppm or less (Ta = 20º C)
ETHERNET connector   RJ45
  Supported standards   100BASE-TX, 1000BASE-T
KEYBOARD connector   Mini-DIN (PS/2)
USB connector   USB A-type 4-pin
  Protocol   USB 2.0 HIGH SPEED (480 Mbps)
REMOTE connector   etherCON (CAT6 compatible)
  Power supply voltage   13 V/41 V
  Signal   LVDS serial
Audio performance
Frequency response, ANALOG IN to ANALOG OUT   20 Hz – 20 kHz: ±0.5 dB (Fs = 44.1/48 kHz, JEITA, recording and playback)
20 Hz – 40 kHz: +0.5 dB/−2 dB (Fs = 88.2/96 kHz, JEITA, recording and playback)
20 Hz – 80 kHz: +0.5/−5 dB (Fs = 176.4/192 kHz, JEITA, recording and playback)
Distortion, ANALOG IN to ANALOG OUT   0.005% or less (JEITA, recording and playback)
S/N ratio, ANALOG IN to ANALOG OUT   100 dB or more (JEITA, recording and playback)
Power supply and other specifications
Power   AC 100-240 V, 50-60 Hz
Power consumption   25 W
External dimensions (W x H x D)   483 mm x 94 mm x 317 mm (not including protrusions)
Weight   5.1 kg
Operating temperature range   5–35 ºC

 Scroll To Top