left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


M-AUDIO

BX5 D2

Šifra Proizvoda: 10527

Napiši prvi komentar za ovaj proizvod





249 €

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za par.

Kratak opis

M-Audio BX5 D2  Next-Generation 70-Watt Bi-Amplified Studio Monitors Top Features bi-amplified design with 70 watts of distributed power > cohesive, accurate sound 5” low-frequency drivers with Kevlar cones > rich, defined lows 1” high-frequency drivers with natural silk domes and integrated waveguides > smooth, clear highs optimized rear ports > extended low-frequency response XLR balanced and 1/4” balanced/unbalanced inputs > connect all your gear The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant...

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

M-Audio BX5 D2  Next-Generation 70-Watt Bi-Amplified Studio Monitors

Top Features

bi-amplified design with 70 watts of distributed power > cohesive, accurate sound
5” low-frequency drivers with Kevlar cones > rich, defined lows
1” high-frequency drivers with natural silk domes and integrated waveguides > smooth, clear highs
optimized rear ports > extended low-frequency response

XLR balanced and 1/4” balanced/unbalanced inputs > connect all your gear

The M-Audio® BX studio monitor series is trusted by more musicians and recording professionals than any other. Now, the BX5 D2 monitors extend the bestsellers’ legacy* with an elegant new design inside and out. We leveraged technology from our high-end monitors to extend the frequency response and provide an even more natural listening experience. Custom Class A/B analog amplifiers deliver superior dynamics and tonal accuracy across the frequency spectrum—while the latest-generation woven Kevlar low-frequency drivers and waveguide-loaded silk dome tweeters provide rich, defined sound. With the BX5 D2, you’ll enjoy the utmost accuracy in an engaging listening experience.

* The M-Audio BX5a Deluxe monitors are the best-selling monitors in the United States (Source: MI SalesTrak® reports January 2009 – December 2010).

 
Accurate and enjoyable

Whether you’re recording, mixing, or mastering, your monitors are your primary reference source. Accurate monitors let you hear exactly what’s happening in your mixes—and give you the assurance that your music will translate well to other listening environments. The M-Audio BX5 D2 monitors leverage a decade of monitor engineering expertise to deliver exceptional transparency and sonic definition—allowing you to enjoy marathon mixing sessions with minimal listening fatigue.

 
Designed for pros—and beginners

Countless pros use M-Audio studio monitors to produce and mix the music and audio you hear every day. The BX D2 series makes that same design philosophy and technology available to anyone with a passion for great sound. BX5 D2 helps you understand what’s in your mix so you can make better decisions about how it will translate across a wide variety of systems—from MP3 earbuds to car stereos to audiophile rigs.

 
Silk-dome, waveguide-loaded, high-frequency drivers

Our high-frequency domes are made from natural silk to counter the audible ringing that is inherent in the poorly crafted metallic materials often found in other monitors. The high-frequency driver is fully isolated from the rest of the enclosure to ensure minimum distortion, providing ultra-smooth frequency response up to 22 kHz. It also features a built-in waveguide, which offers an expansive sound stage and exceptional imaging.

 
Kevlar low-frequency drivers

To insure a lifetime of service, we constructed the BX5 D2 monitor’s 5” low-frequency driver from woven Kevlar. Kevlar’s high mechanical and thermal resilience makes it ideal for use in speaker cones. Our engineers also created a curved conical design that improves room dispersion. High-damping reliable rubber surrounds provide percussive musical bass, and insure that the cone reaches its optimal excursion for accurate reproduction. And our high-temperature voice coils reduce power compression, guaranteeing that your monitors will deliver full performance hour after hour.

 
Rear-ported cabinet design

The BX5 D2 cabinet is integrally designed with its other components for optimal performance—right down to rounded corners for reduced edge diffraction and superior imaging. The custom rear port is designed to minimize air turbulence and resulting distortion while adding additional low frequency extension.

 
 Bi-amplified efficiency

The Class A/B bi-amplified design dedicates separate power amps to the high and low frequencies—providing ample headroom for even the loudest and most dynamic of mixes. Combined with a finely tuned crossover, the design ensures that each driver only delivers the frequencies that it can reproduce most efficiently, resulting in tonal accuracy and cohesive sound across the entire frequency spectrum.

 
Find the sweet spot quickly and easily

When monitoring, it’s important to sit in the middle position or “sweet spot” between the two speakers—where the stereo image is optimized. BX5 D2 features a pinhole power LED that makes finding the sweet spot easy. You’ll know you’re in the right listening position when the BX5 D2 power LEDs appear to be brightest.


Full Features

bi-amplified design with 70 watts of distributed power for cohesive, accurate sound
5” low-frequency drivers with Kevlar cones for rich, defined lows
1” high-frequency drivers with natural silk domes and integrated waveguides for smooth, clear highs
optimized rear ports for extended low-frequency response
magnetic shielding eliminates interference with other electronic equipment
XLR balanced and 1/4” balanced/unbalanced inputs for connecting mixers, amplifiers, instruments, DJ gear, and more
volume control
includes two isolation pads

 

Specifications

frequency response 53 Hz – 22 kHz
crossover frequency 3 kHz
low-frequency amplifier power 40 watts
high-frequency amplifier power 30 watts
maximum signal-to-noise (dynamic range) > 100 dB (typical A-weighted)
polarity positive signal at + input produce outward LF cone displacement
input impedance 20 k ohms balanced, 10 k ohms unbalanced
input sensitivity 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet vinyl-laminated MDF
size 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight 11 lbs./unit; 5 kg.

 Scroll To Top