Remaining faithful to Mercury’s heritage as the most versatile of budget loudspeaker ranges, the Mercury 7C is a dedicated centre channel loudspeaker voice matched to other models in the Mercury 7 range. Compact enough to fit in smaller TV cabinets yet potent enough to match the impressive Mercury 7.4 floorstander, this horizontal loudspeaker packs two 127mm (5.00") mid/bass drivers and the Mercury 7 series 28mm (1.10”) tweeter in a rear-ported 6.2 litre cabinet.
Easily integrated into a basic 5.1 channel surround sound system using Mercury 7.2 at the front and Mercury 7.1 at the rear, the Mercury 7C delivers crystal clear dialogue and focused central vocals for multichannel music. Its 240 Watt peak power handling and 91dB/watt efficiency mean it is equally suited to potent Mercury 7 surround sound set-up using Mercury 7.4 at the front and multiples pairs of Mercury 7.1 or 7.2 at the sides and rear of the listening room. Its 32Hz upper frequency extension makes Mercury 7C capable of getting the best from High Resolution multichannel audio while its 62Hz bass response is an ideal match for typical AV receiver bass management systems.
To make the latest generation of Mercury even better than the award-winning Mercury Vi series required completely new driver designs. The new Mercury 7 mid/bass drivers are fitted with a significantly larger than previous models, enabling them to deliver deeper bass with greater punch than any competitor design.
The Mercury 7 cone uses an updated version of Tannoy’s proprietary multi-fibre cone material with a smoothly sculpted profile for better dispersion and more accurate midrange reproduction. The light and stiff cone delivers fast, tight bass while the new computer optimised rubber surround provides exceptionally high excursion without over-damping the cone.
The new 28 mm (1.10") Mercury 7 tweeter uses a soft woven polyester dome that is coated to Tannoy’s exacting specification with a micro layer of nitro-urethane. This special lamination process damps the dome and pushes its break-up frequencies far beyond the audio range. The trebble is smooth and detailed with an extended frequency response to over 32 kHz.
Throughout the signal path, Mercury 7 benefits from technologies trickled down from Tannoy’s high-performance and luxury speaker ranges. The crossovers employ close tolerance components throughout, including low-loss laminated iron core inductors for seamless integration between drivers. Internal wiring is silver-plated Oxygen Free Copper and speaker terminals utilise Tannoy custom designed gold-plated binding posts.
Mercury 7 cabinets are the series’ most acoustically neutral enclosures to date. By creating a rigid, low resonant foundation for the drivers, has always been the starting point for Mercury models, ensuring reduced cabinet colouration giving a natural and more spacious sound.
The new cabinets also boast extensive use of Tannoy’s Differential Materials Technology (DMT) compound. Used in critical areas, such as driver to cabinet interface and crossover component mounts, this high tech material damps unwanted vibrations and further reduce colouration. As with DMT application in Tannoy’s luxury and Prestige loudspeaker ranges, the treatment delivers a crisper, more open sound with enhanced detail and micro-dynamics.
|Recommended amplifier power (Watts RMS)||20 - 120|
|Continuous power handling (Watts RMS)||60|
|Peak power handling (Watts)||240|
|Sensitivity (2.83 Volts @ 1m)||91 dB|
|Nominal Impedance (Ohms)||8|
|Frequency response (-6 dB)||62 Hz - 32 kHz|
|Dual Concentric High frequency||28 mm (1.1") Nitro-urethane damped layer woven polyester dome, neodymium magnet system|
|Dual Concentric Low frequency||127 mm (5") Multi- fibre coated pulp paper cone x 2|
|Crossover Frequency||3.5 kHz|
|Crossover Type||Passive low loss 2nd order low pass, 3rd order high pass|
|Enclosure type||Twin rear ported reflex|
|Volume||6.2 l (0.22 cu. ft)|
|Dimensions (H x W x D)
|160.0 x 420.0 x 167.3 mm
(6.3 x 16.5 x 6.6")
|Net weight||4.4 kg