left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


JBSystems

DSPA-1000

Šifra Proizvoda: 80406

Napiši prvi komentar za ovaj proizvod





389 €

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za komad.

Kratak opis

Professional DSP-controlled switch mode power amplifier. The high efficient class-D design guarantees high power, even at 2Ω! Stereo: 2x 300Wrms @ 8Ω ~ 2x 500Wrms @ 4Ω ~ 2x 750Wrms @ 2Ω Bridge: 1000Wrms @ 8Ω ~ 1500Wrms @ 4Ω Perfect for both DJ and install applications (pubs, shops, hotels, restaurants, … ) Complete DSP-section with: HPF: (40~125Hz) eliminates unwanted, energy absorbing frequencies. LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations. 8 Band parametric EQ: (100Hz~12.5kHz, Q:0.5~5, ±6db) for perfect tuning. 2 Limiters: for increased protection (threshold 0~-12dB). 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each...

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

Description

 

 

 

  • Professional DSP-controlled switch mode power amplifier.
  • The high efficient class-D design guarantees high power, even at 2Ω!
  • Stereo: 2x 300Wrms @ 8Ω  ~  2x 500Wrms @ 4Ω  ~  2x 750Wrms @ 2Ω
  • Bridge: 1000Wrms @ 8Ω  ~  1500Wrms @ 4Ω
  • Perfect for both DJ and install applications (pubs, shops, hotels, restaurants, … )
  • Complete DSP-section with:
    • HPF: (40~125Hz) eliminates unwanted, energy absorbing frequencies.
    • LPF: (6.3k~20kHz) cuts the upper frequencies if needed to avoid oscillations.
    • 8 Band parametric EQ: (100Hz~12.5kHz, Q:0.5~5, ±6db) for perfect tuning.
    • 2 Limiters: for increased protection (threshold 0~-12dB).
    • 2 Delays: can be set separately from 0 to 20ms (0 to 6,86m) for each channel.
    • Crossover: build an active system (Linkwitz-Riley 24dB/oct, 50Hz~3,15kHz)
    • 3 working modes: Stereo, Bridge, Input Y (mono in, used for active system)
  • Temperature controlled fan cooling
  • DC fault + high temperature + overload + short circuit protections
  • Balanced XLR + jack inputs with possibility for daisy chaining of several inputs.
  • SpeakON® + bind-post wire terminal outputs

 

Technical Information

 

 

 

Power stereo 8Ω (1kHz, THD+N 1%):  2x300Wrms
Power stereo 4Ω (1kHz, THD+N 1%):  2x 500Wrms
Power stereo 2Ω (1kHz, THD+N 1%):  2x 750Wrms
Power bridge 8Ω (1kHz, THD+N 1%):  1000Wrms
Power bridge 4Ω (1kHz, THD+N 1%):  1500Wrms
Freq. Resp. (+/-0.5dB):  20-20.000Hz
Input sensitivity: +4dBu (1,2Vrms)
Input CMMR (1kHz): >50dB
Input impedance: 30kΩ Balanced, 15kΩ un-Balanced
THD: S/R ratio: >100dB
Channel separation 8Ω/1kHz: >70dB
Damping factor 8Ω/400Hz: >200
Cooling: fan cooling
Amplifier type: Class D (switch mode)
Power supply type: Switch mode
Input Connections: Balanced XLR + balanced ¼" (6,3mm) stereo jacks
Output Connections: bind-post wire terminals and 2 SpeakON® for Stereo & Bridge Output
Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut
Amplifier working modes: Stereo ~ Bridge ~ Y-mode
DSP processing:  
  • HPF: 40Hz ~ 150Hz
  • LPF: 6,3kHz ~ 20kHz
  • PEQ: 8band 100Hz ~ 12,5kHz * Q: 0,5 ~ 5 * Gain: ±6dB
  • 2 Clip limiters: 0dB ~ -12dB
  • 2 Delays (time alignment): 0 ~ 20ms (6,86m)
  • X-over (24dB/oct Linkwitz/Riley) : 50Hz ~ 3,15kHz
Power Supply:  100~240Vac 50/60Hz
Dimensions (mm): 482 x 88 x 280
Weigth (kg): 4,9

 Scroll To Top