left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


APart

CHAMP ONE

Šifra Proizvoda: 50291

Napiši prvi komentar za ovaj proizvod





598 €

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za komad.

Kratak opis

  Champ - One realizes what many in the audio industry deemed impossible: an amplifier without cooling fans that is capable of delivering high-end musical sound, high dynamics, high reliability. No fan Power amplifiers have to operate in demanding circumstances. Places where the air is full of dust, nicotine or grease. Because power generates heat, power amplifiers typically have fans to keep their electronic circuits cool.

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

CHAMP ONE

 


High End and very dynamic 19" power amplifier, 2 x 600 Watts @ 4Ω, CONVECTIONAL COOLING, black

 

  • Bridge-mono operation 8 ohm : 1100 W
  • 2 channel mode 8 ohm : 400 W / ch
  • 2 channel mode 4 ohm : 600 W / ch
  • 2 channel mode 2 ohm : not allowed
  • Dynamic capacity at 1.7 ohm, both channels driven : 1000 W / ch
  • Input impedance / sensitivity unbalanced (RCA) / 4 ohm : 10 Kohm / 1 V 0dBV
  • Input impedance / sensitivity balanced (XLR) / 4 ohm : 20 Kohm / 1 V 0 dBV
  • Frequency response (0, -0.5 dB) : 10 Hz – 50 kHz
  • THD : < 0.05 %
  • IMD : < 0.08 %
  • Noise : >100 dBA
  • Gain : 33 dB (39 dB bridged)
  • Damping factor “Solid” : >100 at binding posts
  • Damping factor “Tube” : >10 at binding posts
  • Dynamics and level control : APC, programmable
  • Power amp circuit design : High current, high voltage class G-H
  • Efficiency (dynamic program of 10 dB, 1 V input) : >70 %
  • Protection circuits : DC, HF, clip, overcurrent, short-circuit
  • Temperature protection : 2 step / channel + transformer 105°C
  • Cooling : convectional, no fan
  • Power consumption : 18VA idle, 1KVA full program, 1.5KVA peak
  • Mains power requirements : 230VAC, 50Hz
  • Net dimensions (cm) (W x H x D) : 48.3 x 8.8 x 38
  • Gross dimensions (cm) (W x H x D) : 57 x 14 x 55
  • Net weight : 13 kg
  • Gross weight : 19 kg


Champ - One realizes what many in the audio industry deemed impossible: an amplifier without cooling fans that is capable of delivering high-end musical sound, high dynamics, high reliability.

 


Champ - One realizes what many in the audio industry deemed impossible: an amplifier without cooling fans that is capable of delivering high-end musical sound, high dynamics, high reliability.


No fan

Power amplifiers have to operate in demanding circumstances. Places where the air is full of dust, nicotine or grease. Because power generates heat, power amplifiers typically have fans to keep their electronic circuits cool.

Unfortunately, these cooling fans are a major headache in the use of high-power amplifiers. They tend to be noisy, and if -or rather, when- the fan breaks down because of dust collection, the amplifier overheats and ultimately fails.

A fanless amplifier seems the logical thing, but -until now-, the idea never seemed to work for high quality amps with high output power. The electronics of a typical class AB amplifier with high output power simply produce more heat than the unit is able to dissipate. Thus, installers stick to fan-cooled models and get out of bed to replace a fried amplifier ….


Unique heat sinks

Especially for Champ - One APart introduces the unique, custom-designed side mount heat sinks. In combination with a self-supporting low resonance frame, they make it possible to create a discrete high power amplifier without a noisy and dust-collecting fan inside the enclosure.

This means: less maintenance, no annual fan or dust filter exchange procedure, no more amplifier cleanout, and no more unwanted noise from cooling fans. Champ ONE uses a clever class GH topology which has about 30% better efficiency compared with a class AB amplifier. Because of this, Champ ONE can rely on convection cooling only, a unique feature in its output power class!


APC power management circuitry gets the best out of an amplifier

APC power management circuitry has been designed especially for Champ-One. It is one of the most intelligent amplifier protection circuits ever designed, simply because it does the job without interfering with the typical dynamic character of music.

APC allows the user to preset the power potential of the amplifier, while maintaining high power reserves and thus producing high, clean power. It constantly analyses incoming music signals and keeps dynamics alive. An additional ultra fast peak limiter avoids amplifier clipping. With APC, your system is always in control, including your speakers.

All the components in Champ - One are audiophile grade quality. Thanks to the tube emulation circuitry, the unit produces an exceptionally warm sound, which considerably reduces listeners’ fatigue.

The striking design and technical innovations of the Champ - One are setting new industry standards….whether it is for AV, studio, gigs, home or catering applications: experience the pure musical power of Champ-One !

 Scroll To Top