left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


QSC

RMX 1850 HD

Šifra Proizvoda: 7450

Napiši prvi komentar za ovaj proizvod





865 €

Dostupnost:

Na lageru


Prikazana cena je za komad.

Kratak opis

The power supply is the heart of an amplifier, converting raw AC power from the wall to clean DC for the audio circuitry. The RMX uses a powerful high-current toroidal transformer and ample filter capacitance to ensure generous energy reserves. This makes a critical difference in sound quality, allowing the amp to effortlessly punch out high level transients, even when driving abusive 2 ohm speaker loads.

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

RMX 1850 HD

 

 

Muscular Power Plant

 

The power supply is the heart of an amplifier, converting raw AC power from the wall to clean DC for the audio circuitry. The RMX uses a powerful high-current toroidal transformer and ample filter capacitance to ensure generous energy reserves. This makes a critical difference in sound quality, allowing the amp to effortlessly punch out high level transients, even when driving abusive 2 ohm speaker loads.

 

Superior Performance

 

RMX amplifiers deliver true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion (<0.05% THD) and a ruler-flat frequency response. SMT (Surface Mount Technology) triples small-signal component density, enabling us to pack up to 2400 watts of power in a chassis only 2 rack spaces and less than 16" deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling and cooling.

 

Comprehensive Features

 

The RMX Series is packed full of professional features that increase performance and flexibility:

  • The RMX 1850HD provides improved thermal performance that gives you higher continuous power in 2 ohms stereo or 4 ohms bridged applications (a RMX 1850HD exclusive!)
  • Independent defeatable clip limiters reduce distortion without sacrificing peak performance.
  • Selectable low-frequency filters boost system response, protect speakers and ensure low-end tightness by more precisely matching the amplifier's range to the loudspeakers.
  • Barrier strip, XLR and 1/4" balanced inputs plus Speakon and binding post outputs provide easy connections.
  • Low-noise variable speed fans with rear-to-front air flow keep amplifiers and racks cool.

 

Proven Reliability

 

With over 30 years of building amplifiers for the largest touring companies and venues around the world, you can count on QSC's reputation for designing the most reliable amps available.



FEATURES

  • Compact size - up to 2400 watts in 2 rack spaces
  • Professional quality performance - incorporates road-proven QSC designs
  • High-current toroidal transformers for greater two-ohm power and low noise
  • Independent user-defeatable clip limiters reduce distortion
  • Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
  • Balanced 1/4" (6.3mm) TRS, XLR and barrier strip inputs
  • Binding post and Neutrik Speakon outputs
  • Front mounted gain controls for easy access
  • Signal and Clip LED indicators to monitor performance
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 

 

 

SPECIFICATIONS

 RMX 1850HD
  STEREO MODE (Both Channels Driven)
8 ohms
  FTC 20 Hz - 20 kHz, 0.1% THD 
  EIA 1 kHz, 0.1% THD
 
350 W
360 W
4 ohms
  FTC 20 Hz - 20 kHz, 0.1% THD 
  EIA 1 kHz, 0.1% THD
 
550 W
600 W
2 ohms 
   EIA 1 kHz, 1% THD
 
900 W
  BRIDGE MONO MODE
8 ohms 
  FTC 20 Hz - 20 kHz, 0.1% THD 
  EIA 1 kHz, 0.1% THD
 
1100 W
1200 W
4 ohms 
   EIA 1 kHz, 1% THD
 
1800 W
Signal to Noise, 20 Hz-20 kHz   100 dB
Distortion (SMPTE-IM)   Less than 0.02%
Input Sensitivity @ 8 ohms   1.16V (+3.5 dBu)
Voltage Gain   46x (33 dB)
Output Circuitry   Class H
Power Requirements
1/8 power pink noise at 4 ohms *
  6A
   
Distortion (Typical)
  20 Hz - 20 kHz: 10 dB below rated power
  1.0 kHz and below: full rated power

Less than 0.03% THD, 4 and 8 ohms
Less than 0.03% THD, 4 and 8 ohms
Frequency Response 20 Hz-20 kHz, ±1 dB
-3 dB points: 5 Hz - 50 kHz
Damping Factor, 1 kHz and below Greater than 300 at 8 ohms
Input Impedance 10k ohms unbalanced, 20k ohms balanced
Input Clipping 10 Vrms (+22 dB)
Cooling Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm)
TRS tip and XLR (pin 2 positive)
Output: touch-proof binding posts and Neutrik® Speakon®
Controls Front: AC switch, Ch. 1 and Ch. 2 gain knobs
Rear: 10-position DIP switch
Indicators Power-On: Green LED
Signal: Yellow LED (1 per channel)
Clip: Red LED (1 per channel)
Amplifier Protection Stable into reactive or mismatched loads
Load Protection On/off muting, AC coupling (850, 1450), triac crowbar (1850HD, 2450, on each channel)
Power Requirements 100, 120, 230 VAC, 50-60 Hz
Dimensions 19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 RU), 
15.9" (40 cm) deep (rack mounting to rear support ears)
Weight 44.5 lbs (20.2 kg) 

 Scroll To Top