left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


dbx

231 EQ

Šifra Proizvoda: 5990

Napiši prvi komentar za ovaj proizvod





call

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za komad.

Kratak opis

With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut range; XLR, 20mm faders and 1/4" inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability. The 2-Series represents a major step forward in the performance of entry-level...

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

With a lineage extending back to the revered 12 and 20 Series graphic equalizers, the dbx® 231 easily lives up to the dbx reputation at a price point which can find a home in the tightest of budgets. Besides including two 31-band channels of 1/3-octave equalization, the 231 also offers ±6 or ±12 dB boost/cut range; XLR, 20mm faders and 1/4" inputs; nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.

The 2-Series represents a major step forward in the performance of entry-level graphic equalizers. From its amazing 10Hz to 50kHz frequency response, to its 108dB dynamic range and internal toroidal transformer, the 2-Series offers out of this world specifications with a down to earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the 2-Series is destined to take its rightful place in the lineage of great dbx® signal processors that are the Professional's Choice™. With such affordable quality, there's no longer any excuse for compromising your sound.


  • Two 31-band, 1/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ±6 or ±12 dB
  • 12dB per octave 50Hz low-cut filter
  • Front panel bypass switch
  • ±12 dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS Inpts and Outputs
  • Internal Toroidal Transformer
  • Frequency Repsonse of 50kHz
  • Dynamic range of greater than 108dB

INPUT
Connectors:
1/4" TRS, female XLR (pin 2 hot)
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced 40k ohm, unbalanced 20k ohm
Max Input Level:
>+21dBu balanced or unbalanced
CMRR:
>40dB, typically >55dB at 1kHz

OUTPUTS
Connectors:
1/4" TRS, male XLR (pin 2 hot)
Type:
Impedance-balanaced/unbalanced, RF filtered
Impedance:
Balanced 100 ohm, unbalanced 50 ohm
Max Output Level:
>+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)

SYSTEM PERFORMANCE
Bandwidth:
20Hz to 20kHz, +0.5/-1dB
Frequency Response:
50kHz, +0.5/-3dB
Dynamic Range:
108dB
Signal-to-Noise:
90dB
THD+Noise:
<0.004%
Interchannel Crosstalk:
<-80dB, 20Hz to 20kHz

FUNCTION SWITCHES
EQ Bypass:
Bypasses the graphic equalizer section in the signal path
Low Cut:
Activates the 50Hz 12dB/octave high-pass filter
Range:
Selects either +/- 6dB or +/- 12dB slider boost/cut range

POWER SUPPLY
Operating Voltage:
100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
Power consumption:15W
Main Connection:
IEC receptacle

 

 

 

 

 

 Scroll To Top