Dobrodošli u Player svet! Prijavi se ili Registracija

EIGHTEEN SOUND HD1040

EIGHTEEN SOUND HD1040


Proizvođač: EIGHTEEN SOUND HD1040
Dostupnost: Na stanju
Šifra Proizvoda: 4882
Prikazana cena je za komad.

HF Compression Driver 8 Ohm ·         1 inch exit throat ·         107 dB SPL 1W / 1m average sensitivity ·         44mm (1 3/4 inch) voice coil diameter ·         80 Watt program power handling ·         Treated polyethylene diaphragm ·         Proprietary phase plug design The HD1040 one inch exit high frequency compression driver has been designed for use in high quality audio systems.Equipped with proprietary Phase Plug architecture, the HD1040 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The HD1040 diaphragm assembly is made by proprietary treated Polyethylene material. Thanks to its superior diaphragm dimensional stability (160°C), the polyethilene shows constant behaviour during its whole working life. Moreover, this particular material with its very high value of elasticity modulus, (50% more than standard Mylar and 100% more than polyimide film) is capable of superior transient and intermodulation distortion response. The flat suspension shape is designed to maintain low stiffness and low mid band distortion and response. An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows a 30% higher value of tensile elongation at a working operative temperature, (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is suitable for use in damp and wet environments. The HD1040 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap within a compact ferrite motor structure. GENERAL SPECIFICATIONS Throat Diameter 25,4 mm (1 in) Rated Impedance 8 ohm DC Resistance 5,3 Ohm Minimum Impedance 7 Ohm at 4000Hz AES power  40 W above 1,6 kHz Program power  80 W above 1,6 kHz Sensitivity(1W@1m) 107 dB Frequency Range 1600Hz ÷ 20kHz Recomm. Xover Frequency 1600Hz (12dB/oct slope) Diaphragm Material Treated polyethylene Voice Coil Diameter 44,4mm (1 3/4 in) Voice Coil Winding Material Edge-wound aluminum Magnet Material Ferrite Flux Density 1,6 T BL Factor 7,4 N/A Polarity Positive voltage on + terminal gives positive pressure in the throat MOUNTING INFORMATIONS Overall diameter 110 mm (4,3 in) Mounting holes diameter 4 M6 holes 90° at Ø 76 mm (3 in) Bolt circle diameter 76 mm (3 in) Total depth 60,5 mm (2,38 in) Net weight 1,8 Kg (4 lb) Shipping weight 1,9 Kg (4,22 lb) CardBoard Packaging dimensions 110x110x63 mm (4,3x4,3x2,5 in) HD1040 MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XT1086 HORN MOUTH AXIS FREE AIR IMPEDANCE MAGNITUDE CURVE


€ 99

HF Compression Driver 8 Ohm
·         1 inch exit throat
·         107 dB SPL 1W / 1m average sensitivity
·         44mm (1 3/4 inch) voice coil diameter
·         80 Watt program power handling
·         Treated polyethylene diaphragm
·         Proprietary phase plug design
 
 
The HD1040 one inch exit high frequency compression driver has been designed for use in high quality audio systems.
Equipped with proprietary Phase Plug architecture, the HD1040 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction.
The HD1040 diaphragm assembly is made by proprietary treated Polyethylene material. Thanks to its superior diaphragm dimensional stability (160°C), the polyethilene shows constant behaviour during its whole working life. Moreover, this particular material with its very high value of elasticity modulus, (50% more than standard Mylar and 100% more than polyimide film) is capable of superior transient and intermodulation distortion response. The flat suspension shape is designed to maintain low stiffness and low mid band distortion and response.
An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows a 30% higher value of tensile elongation at a working operative temperature, (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is suitable for use in damp and wet environments.
The HD1040 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap within a compact ferrite motor structure.
 

GENERAL SPECIFICATIONS
Throat Diameter 25,4 mm (1 in)
Rated Impedance 8 ohm
DC Resistance 5,3 Ohm
Minimum Impedance 7 Ohm at 4000Hz
AES power  40 W above 1,6 kHz
Program power  80 W above 1,6 kHz
Sensitivity(1W@1m) 107 dB
Frequency Range 1600Hz ÷ 20kHz
Recomm. Xover Frequency 1600Hz (12dB/oct slope)
Diaphragm Material Treated polyethylene
Voice Coil Diameter 44,4mm (1 3/4 in)
Voice Coil Winding Material Edge-wound aluminum
Magnet Material Ferrite
Flux Density 1,6 T
BL Factor 7,4 N/A
Polarity Positive voltage on + terminal gives positive pressure in the throat

MOUNTING INFORMATIONS
Overall diameter 110 mm (4,3 in)
Mounting holes diameter 4 M6 holes 90° at Ø 76 mm (3 in)
Bolt circle diameter 76 mm (3 in)
Total depth 60,5 mm (2,38 in)
Net weight 1,8 Kg (4 lb)
Shipping weight 1,9 Kg (4,22 lb)
CardBoard Packaging dimensions 110x110x63 mm (4,3x4,3x2,5 in)
 
HD1040 MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XT1086 HORN MOUTH AXIS
 
FREE AIR IMPEDANCE MAGNITUDE CURVE



Nazad na kategoriju Ugradni Zvučnici / Delovi