left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


Eighteen Sound

HD1050 8 Ohm

Šifra Proizvoda: 7027

Napiši prvi komentar za ovaj proizvod





106 €

Dostupnost:

Na lageru


Prikazana cena je za komad.

Kratak opis

HD1050    HF Compression Driver Key features 107 dB SPL 1W / 1m average sensitivity 1 inch exit throat 44 mm (1 3/4 inch) voice coil diameter 100 Watt program power handling Titanium dome over PEN suspension Proprietary phase plug design Downloads  Data sheet  Drawing   Description The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase...

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

HD1050    HF Compression Driver
 
Key features

  • 107 dB SPL 1W / 1m average sensitivity
  • 1 inch exit throat
  • 44 mm (1 3/4 inch) voice coil diameter
  • 100 Watt program power handling
  • Titanium dome over PEN suspension
  • Proprietary phase plug design
Downloads
 Data sheet
 Drawing
 

Description
The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems.
Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction.
The diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments.
The HD1050 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap and within a compact ferrite motor structure.
 
GENERAL SPECIFICATIONS
Throat Diameter 25,4 mm (1 in)
Rated Impedance 8 ohm
DC Resistance 5,3 Ohm
Minimum Impedance 7 Ohm at 4000Hz
AES power (1) 50 W above 1,6 kHz
Program power (2) 100 W above 1,6 kHz
Sensitivity(1W@1m) (3) 107 dB
Frequency Range 1600Hz ÷ 20kHz
Recomm. Xover Frequency 1600Hz (12dB/oct slope)
Diaphragm Material Titanium - PEN
Voice Coil Diameter 44,4 mm (1 3/4 in)
Voice Coil Winding Material Edge-wound aluminum
Magnet Material Ferrite
Flux Density 1,6 T
BL Factor 7,4 N/A
Polarity Positive voltage on + terminal gives positive pressure in the throat

MOUNTING INFORMATIONS
Overall diameter 110 mm (4,3 in)
Mounting holes diameter 4 M6 holes 90° at Ø 76 mm (3 in)
Bolt circle diameter 76 mm (3 in)
Total depth 60,5 mm (2,38 in)
Net weight 1,8 Kg (4 lb)
Shipping weight 1,9 Kg (4,22 lb)
CardBoard Packaging dimensions 110x110x63 mm (4,3x4,3x2,5 in)
 
HD1050 MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XT1086 HORN MOUTH AXIS
HD1050 MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XT1086 HORN MOUTH AXIS

FREE AIR IMPEDANCE MAGNITUDE CURVE
FREE AIR IMPEDANCE MAGNITUDE CURVE

 Scroll To Top