Dobrodošli u Player svet! Prijavi se ili Registracija

SHURE BETA 56A

SHURE BETA 56A


Proizvođač: SHURE BETA 56A
Dostupnost: Nema na stanju
Šifra Proizvoda: 6224
Prikazana cena je za komad.

The Shure Beta 56®A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.FEATURES: Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound Built–in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound Compact design reduces stage clutter   Hardened steel mesh grille resists wear and abuse Neodymium magnet for high signal–to–noise ratio output Minimally affected by varying load impedance Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration Legendary Shure quality and reliability Type             Dynamic (moving coil)Frequency Response50 to 16,000 Hz View LargerNOTE: The curve shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.Polar PatternSupercardioid, rotationally symmetrical about microphone axis, uniform with frequencyOutput Level (at 1,000 Hz)Open Circuit Voltage -51 dBV/Pa (2.8 mV)(1 Pa = 94 dB SPL) Impedance Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low ZPolarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3Connector Three-pin professional audio connector (male XLR type)Case Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grilleAdjustable, Locking Stand Adapter Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 threadNet Weight 468 grams (16.7 oz)  


call

The Shure Beta 56®A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.

A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

FEATURES:

  • Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
  • Built–in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound
  • Compact design reduces stage clutter
     
  • Hardened steel mesh grille resists wear and abuse
  • Neodymium magnet for high signal–to–noise ratio output
  • Minimally affected by varying load impedance
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Legendary Shure quality and reliability

 

Type
             Dynamic (moving coil)
Frequency Response
50 to 16,000 Hz
NOTE: The curve shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.Polar PatternSupercardioid, rotationally symmetrical about microphone axis, uniform with frequencyOutput Level (at 1,000 Hz)Open Circuit Voltage -51 dBV/Pa (2.8 mV)(1 Pa = 94 dB SPL)

Impedance
Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector
Three-pin professional audio connector (male XLR type)
Case
Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille
Adjustable, Locking Stand Adapter
Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 thread
Net Weight
468 grams (16.7 oz)



Nazad na kategoriju Instrumentalni