left right

Dobrodošli na Player e-shop!

Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!



Šifra Proizvoda: 85744

Napiši prvi komentar za ovaj proizvod



Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:

ili emailom:

Kratak opis

The TM-2X is a stereo X-Y pattern microphone for DSLR cameras – the ideal solution to combine high-quality audio with high-definition video. It allows users to utilize the same cardioid mics made popular on the DR-Series PCM recorders and record straight into their camera of choice.

Pogledaj proizvod iz više uglova:

*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

The two high-quality mic capsules can be rotated horizontally by 180 degrees and accept high sound pressure levels up to 125 dB SPL. They are equipped with a switchable low-cut filter, a two-stage output level adjustment to adjust for varying cameras input levels, and all of this rests on a floating support structure to eliminate handling noise. For additional noise isolation, the TM-2X ships with an isolation arm to distance the mics from auto-focus noise caused by the camera lens, and place the mics closer to the audio source being recorded. For outdoor recording, an included fur windscreen can be attached. The TM-2X and noise-isolation arm are mounted to the top of the camera via a standard shoe mount. The mics plug into the camera’s 3.5-mm mic input, and are powered from the standard plug-in power supplied by the DSLR camera.

Main Features

  • High-grade stereo condenser microphone for high-quality sound recording with DSLR or mirrorless cameras
  • Can be mounted directly to the camera accessory shoe and swivelled by 180 degrees to capture sound sources in front or behind the user
  • Tripod attachment screw-hole (1/4-inch) to place the microphone apart from the camera
  • XY orientation for clear stereo definition and minimal phase differences
  • Accepts high sound pressure level up to 125 dB SPL
  • Switchable input sensitivity for optimum performance with any camera model
  • Switchable filter to minimize unwanted low-frequency noise
  • Operates with plug-in power – no battery required
  • Noise isolation arm included to reduce possible noise being recorded from the camera's lens or stabilizer mechanisms
  • Fur windscreen included to reduce noise being recorded in outdoor situations


Microphone type   Cardioid condenser microphone
Frequency range   50 Hz – 20 kHz
Input and output
Maximum input level   120dB SPL (at 1 kHz with sensitivity set to H and low-cut filter set to FLAT)*
Output impedance   1.6 kΩ*
S/N ratio   74 dB typical*
Mic sensitivity (SENS) switch   H = −37 dB, L = −52 dB (1 kHz, 0 dB = 1 V/Pa)*
Low-cut filter cutoff frequency   130 Hz*
*RL = 2.2 kΩ, Vcc = 2.5 V
Cable length   33 cm
Plug   3.5 mm TRS stereo mini plug (Tip: left channel, Ring: right channel, Sleeve: ground)
Power supply and other specifications
Power requirements   Plug-in power (JEITA standard CP-1203A)
Outer dimensions (width × height × depth)   57 mm × 59 mm × 69 mm (excluding cable and accessories)
Weight   75 g (without arm)
Operating temperature range   5–35°C
Supplied accessories   Noise isolation arm, fur windscreen

 Scroll To Top