Do besplatne dostave Vam je ostalo još 2.000,00 RSD
RSD
 
 

MARTIN RUSH MH 3 Beam

Šifra: 8935
Regularna cena:
287.880,00 rsd
209.900,00 rsd (Bez PDV-a)
Cena sa popustom * :
Cena za kupovinu na rate:
Cena sa popustom * :
251.880,00 rsd

*Cena sa popustom može da se ostvari ukoliko se plaća gotovinski, virmanom (preko računa) ili odmah debitnom i kreditnom karticom.

Iznos rate:
Ušteda : 36.000,00 rsd
Prikazana cena je za komad.

Garantujemo najnižu cenu!

Prijavi povoljniju cenu Obavesti me ako cena padne Postavi pitanje
Opcija:

The RUSH MH 3 Beam is a powerful beam moving head that blasts an intense and narrow long-throw beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer and strobe, frost, zoom, 8-facet prism and focus.

Powerful beam moving head
Sharp, narrow long-throw beam
Mid-air effects
Fixed gobo wheel
Color wheel
Mechanical dimming and strobe
Frost effect
8-facet prism
Motorized focus
Battery-powered display
3 & 5 pin XLR

Physical
Length: 418 mm (16.5 in.)
Width: 321 mm (12.6 in.)
Height: 489 mm (19.3 in.)
Weight: 20.5 kg (45.2 lbs.)

Lamp
Approved lamp: Philips MSD Platinum 5R
Color temperature: 8000 K
CRI (Color rendering index): 75
Average lifetime: 2000 hours

Dynamic Effects
Color wheel: 14 colors plus open, rotation with variable direction and speed
Static gobo wheel: 17 gobos plus open, wheel rotation and shake
Pre-programmed effects: 31 pan and tilt macros, adjustable speed
Shutter: Strobe effect, pulse effects, instant open and blackout
Prism: 8-facet, indexing and rotation with variable direction and speed
Frost: Fade in/out
Zoom: Motorized
Focus: Motorized
Dimmer: 0 - 100%, four dimming curve options
Pan: 540°
Tilt: 270°
Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming
Control: DMX
DMX channels: 19
Setting and addressing: Control panel with LCD display
DMX compliance: USITT DMX512/1990

Optics
Beam angle: 1° - 3.8°

Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20

Installation
Mounting points: Two quarter-turn brackets for rigging clamps
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any

Connections
AC power input: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR

Electrical
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 390 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Thermal
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)

Included Items
Power cable, 1.5 m (4.9 ft.), without mains plug
Mounting brackets

Ordering Information
RUSH MH 3 Beam™ in cardboard box

    

The RUSH MH 3 Beam is a powerful beam moving head that blasts an intense and narrow long-throw beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer and strobe, frost, zoom, 8-facet prism and focus.

 

  • Powerful beam moving head
  • Sharp, narrow long-throw beam
  • Mid-air effects
  • Fixed gobo wheel
  • Color wheel
  • Mechanical dimming and strobe
  • Frost effect
  • 8-facet prism
  • Motorized focus
  • Battery-powered display
  • 3 & 5 pin XLR
Length: 418 mm (16.5 in.)
Width: 321 mm (12.6 in.)
Height: 489 mm (19.3 in.)
Weight: 20.5 kg (45.2 lbs.)

Approved lamp: Philips MSD Platinum 5R
Color temperature: 8000 K
CRI (Color rendering index): 75
Average lifetime: 2000 hours

Color wheel: 14 colors plus open, rotation with variable direction and speed
Static gobo wheel: 17 gobos plus open, wheel rotation and shake
Pre-programmed effects: 31 pan and tilt macros, adjustable speed
Shutter: Strobe effect, pulse effects, instant open and blackout
Prism: 8-facet, indexing and rotation with variable direction and speed
Frost: Fade in/out
Zoom: Motorized
Focus: Motorized
Dimmer: 0 - 100%, four dimming curve options
Pan: 540°
Tilt: 270°
Pan and tilt speed: Adjustable via onboard control panel and DMX

Control: DMX
DMX channels: 19
Setting and addressing: Control panel with LCD display
DMX compliance: USITT DMX512/1990

Beam angle: 1° - 3.8°

Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20

Mounting points: Two quarter-turn brackets for rigging clamps
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any

AC power input: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR

AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 390 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)

Power cable, 1.5 m (4.9 ft.), without mains plug  
Mounting brackets  

RUSH MH 3 Beam™ in cardboard box  


© 2013 Martin Professional A/S.  Specifications subject to change without notice
Ocena:

Vezani artikli


Srodni proizvodi