Dobrodošli u Player svet! Prijavi se ili Registracija

DYNACORD POWERMATE 1000 MK3

DYNACORD POWERMATE 1000 MK3


Proizvođač: DYNACORD POWERMATE 1000 MK3
Dostupnost: Na stanju
Šifra Proizvoda: 7572
Prikazana cena je za komad.

Power-Mixer 3.generation with 6+4 Inputs, 6x AUX, 2 digital Effect-channels, 4-channel USB Audio Interface, 11-Band Stereo-EQ and 2x 1000 watts Class-D amp.   Third-generation success story: the PowerMate3! The current PowerMate generation features a multitude of innovations and optimizations. Despite a clear reduction in weight, it offers considerable gains in terms of both power amplifier output and features, as well as being more compact than ever before. The PowerMate 1000-3 is supplied with a very robust plastic lid with an integrated handle, a highly innovative solution that offers optimal protection for the device as well as greater carrying comfort.   Dynacord PowerMate 1000-3 features:  PowerMate with 2x 1000 watt RMS / 4 Ohm power  6 MIC/LINE inputs, 4 stereo MIC/LINE inputs, 6 AUX-busses  30% reduction in weight, more compact dimensions and >50% less energy consumption compared to the  previous models  editable effects  USB digital audio interface + MIDI  innovative transport and protection solution  the XLR microphone input is equipped with an extremely high quality, ultra-low noise, discrete  preamp.  the +48V phantom power for condenser microphones can be switched in groups of six.  line input and channel insert are implemented as jack sockets  gain can be controlled in the range 0-60 dB.  the switchable Lo Cut filter (80Hz, 18dB/oct) serves to eliminate low-frequency noise  a very typical DYNACORD feature is the asymmetrical Voicing Filter by means of which, if desired,  the voice can be powerfully emphasized in the mix.  3-band semi-parametric equalizer makes it possible even for unpractised users to perform the  requisite corrections swiftly and intuitively.  possible to mute each input channel individually and/or listen to its pre-fader signal  Signal Present and Peak LED for level control  channel faders are dust-protected and offer not only excellent crosstalk attenuation but also a  practice-optimized control characteristic.  all potentiometers and faders are high-quality components from ALPS.  2 of the 4 stereo inputs of each model are additionally equipped with cinch (RCA) sockets switched  in parallel for CD or MP3 players.  2 other stereo inputs receive in addition the four channels of the digital audio interface USB 1-2  and USB 3-4  separate gain controls are provided for the stereo Line and Mic inputs to permit them to be used in  parallel if desired.  3-band tone controls are provided and a Balance control replaces the PAN control found in the mono  channel strips.  11-band stereo EQ can be routed to the Master channels or else to either or both of the Monitor  Sends according to choice.  USB 2.0 port serves as a digital audio interface between the PowerMate and a PC or Mac.  the PowerMate also offers a fully-featured PC MIDI  interface  rackmount kit RMK-1000-3 optionally available  dimensions (WxHxD): 483 x 135 x 443,7 mm (rack-mount), 510,5 x 164,5 x 571,5 mm (with cover)  weight: 12,5 kg, with cover 14 kg DYNACORD's PowerMate3 voted 'Product of the Year' Read more... Datasheets / Manuals PowerMate-3 Data Sheet (1.2MB) PowerMate-3 Manual (5.2MB) PowerMate-3 Quickstart (1.13MB) Cubase Setup (0.8MB) 32/64bit Guide (0.1MB) DXF / DWG Drawings dxf/dwg-files (0.4MB)


€ 2190

 

Power-Mixer 3.generation with 6+4 Inputs, 6x AUX, 2 digital Effect-channels, 4-channel USB Audio Interface, 11-Band Stereo-EQ and 2x 1000 watts Class-D amp.

 

Third-generation success story: the PowerMate3! The current PowerMate generation features a multitude of innovations and optimizations. Despite a clear reduction in weight, it offers considerable gains in terms of both power amplifier output and features, as well as being more compact than ever before. The PowerMate 1000-3 is supplied with a very robust plastic lid with an integrated handle, a highly innovative solution that offers optimal protection for the device as well as greater carrying comfort.  
 
Dynacord PowerMate 1000-3 features: 

  • PowerMate with 2x 1000 watt RMS / 4 Ohm power 
  • 6 MIC/LINE inputs, 4 stereo MIC/LINE inputs, 6 AUX-busses 
  • 30% reduction in weight, more compact dimensions and >50% less energy consumption compared to the 
  • previous models 
  • editable effects 
  • USB digital audio interface + MIDI 
  • innovative transport and protection solution 
  • the XLR microphone input is equipped with an extremely high quality, ultra-low noise, discrete 
  • preamp. 
  • the +48V phantom power for condenser microphones can be switched in groups of six. 
  • line input and channel insert are implemented as jack sockets 
  • gain can be controlled in the range 0-60 dB
  • the switchable Lo Cut filter (80Hz, 18dB/oct) serves to eliminate low-frequency noise 
  • a very typical DYNACORD feature is the asymmetrical Voicing Filter by means of which, if desired, 
  • the voice can be powerfully emphasized in the mix. 
  • 3-band semi-parametric equalizer makes it possible even for unpractised users to perform the 
  • requisite corrections swiftly and intuitively. 
  • possible to mute each input channel individually and/or listen to its pre-fader signal 
  • Signal Present and Peak LED for level control 
  • channel faders are dust-protected and offer not only excellent crosstalk attenuation but also a 
  • practice-optimized control characteristic
  • all potentiometers and faders are high-quality components from ALPS. 
  • 2 of the 4 stereo inputs of each model are additionally equipped with cinch (RCA) sockets switched 
  • in parallel for CD or MP3 players. 
  • 2 other stereo inputs receive in addition the four channels of the digital audio interface USB 1-2 
  • and USB 3-4 
  • separate gain controls are provided for the stereo Line and Mic inputs to permit them to be used in 
  • parallel if desired. 
  • 3-band tone controls are provided and a Balance control replaces the PAN control found in the mono 
  • channel strips. 
  • 11-band stereo EQ can be routed to the Master channels or else to either or both of the Monitor 
  • Sends according to choice. 
  • USB 2.0 port serves as a digital audio interface between the PowerMate and a PC or Mac. 
  • the PowerMate also offers a fully-featured PC MIDI 
  • interface 
  • rackmount kit RMK-1000-3 optionally available 
  • dimensions (WxHxD): 483 x 135 x 443,7 mm (rack-mount), 510,5 x 164,5 x 571,5 mm (with cover
  • weight: 12,5 kg, with cover 14 kg
DYNACORD's PowerMate3 voted 'Product of the Year'
Read more...
Datasheets / Manuals
DXF / DWG Drawings



Nazad na kategoriju Miksete