Dobrodošli u Player svet! Prijavi se ili Registracija

AKG HC 577 L

AKG HC 577 L


Proizvođač: AKG HC 577 L
Dostupnost: Na stanju
Šifra Proizvoda: 6979
Prikazana cena je za komad.

Excellent comfort Insensitive to moisture, perspiration, and salts Dual-diaphragm transducer for cable noise suppression Compatible with all standard wireless systems The new AKG HC 577 L has been designed to be invisible in the limelight. It is so small it will virtually disappear on stage or on camera, while providing perfect mobility and pristine audio quality. A patented body design protects the microphone's dual-diaphragm transducer from moisture and perspiration. Mechanical noise, cable noise, etc. are reduced to a minimum. The microphone uses a CK 77 omnidirectional transducer that has been an industry standard for lavalier capsules for years and ensures superior audio performance. The HC 577 L uses dual-ear temple pieces for extreme stability and optimum comfort. Polar pattern omnidirectional Frequency range 20 Hz to 20 kHz Sensitivity 8 mV/Pa (–42 dBV) Max. SPL 133 dB (for 1% THD) Equivalent noise level 26 dB-A Signal/noise ratio (A-weighted) 68 dB Impedance <=3.5 kohms Recommended load impedance >=10 kohms Supply voltage 1.5 V to 12 V Powering <=0.6 mA Connector 3-pin mini XLR Cable 1.5 m (5 ft.) Finish flesh tone Dimensions 205 mm (8.1 in.), max. diameter: 145 mm (5.7 in.) Net weight 28 g (0.99 oz.) Shipping weight 150 g (5.3 oz.)     The microphone shall be an extremely light head-worn design. The microphone shall use a dual-diaphragm transducer with a frequency-independent omnidirectional polar pattern. The transducer element shall be protected from penetrating water, sweat and make-up. An additional moisture shield shall protect the transducer element from water, perspiration and makeup flowing along the microphone arm. The length of the neck-back is adjustible. The microphone boom can be mounted left or right-sided. The length of the microphone boom is adjustable. The microphone shall be available in matte skincolor and meet the following performance criteria: frequency response: 20 to 20,000 Hz, The included Presence Boost cap adds 3dB at approx. 12kHz. sensitivity: 8 mV/Pa (-42dBV), electrical impedance: =<3,500 ohms, equivalent noise level (CCIR 468-3) 37dB, max. SPL(k=1%) 133 dB, power requirement: 1.5 to 12 VDC. The microphone shall be fitted with a 1.5 m (5 ft.) cable and its net (exclusive of the cable)/shipping weight shall be 28/150 grams (0.99/5.29 oz.). Available versions: HC 577 L with Mini-XLR connector for AKG wireless pocket receivers, foam and metal screen windscreens in several colors are also available.


call

  • Excellent comfort
  • Insensitive to moisture, perspiration, and salts
  • Dual-diaphragm transducer for cable noise suppression
  • Compatible with all standard wireless systems

The new AKG HC 577 L has been designed to be invisible in the limelight. It is so small it will virtually disappear on stage or on camera, while providing perfect mobility and pristine audio quality.

A patented body design protects the microphone's dual-diaphragm transducer from moisture and perspiration. Mechanical noise, cable noise, etc. are reduced to a minimum. The microphone uses a CK 77 omnidirectional transducer that has been an industry standard for lavalier capsules for years and ensures superior audio performance.

The HC 577 L uses dual-ear temple pieces for extreme stability and optimum comfort.

 

Polar pattern omnidirectional
Frequency range 20 Hz to 20 kHz
Sensitivity 8 mV/Pa (–42 dBV)
Max. SPL 133 dB (for 1% THD)
Equivalent noise level 26 dB-A
Signal/noise ratio (A-weighted) 68 dB
Impedance <=3.5 kohms
Recommended load impedance >=10 kohms
Supply voltage 1.5 V to 12 V
Powering <=0.6 mA
Connector 3-pin mini XLR
Cable 1.5 m (5 ft.)
Finish flesh tone
Dimensions 205 mm (8.1 in.), max. diameter: 145 mm (5.7 in.)
Net weight 28 g (0.99 oz.)
Shipping weight 150 g (5.3 oz.)

 

 

 

The microphone shall be an extremely light head-worn design. The microphone shall use a dual-diaphragm transducer with a frequency-independent omnidirectional polar pattern. The transducer element shall be protected from penetrating water, sweat and make-up. An additional moisture shield shall protect the transducer element from water, perspiration and makeup flowing along the microphone arm. The length of the neck-back is adjustible. The microphone boom can be mounted left or right-sided. The length of the microphone boom is adjustable. The microphone shall be available in matte skincolor and meet the following performance criteria: frequency response: 20 to 20,000 Hz, The included Presence Boost cap adds 3dB at approx. 12kHz. sensitivity: 8 mV/Pa (-42dBV), electrical impedance: =<3,500 ohms, equivalent noise level (CCIR 468-3) 37dB, max. SPL(k=1%) 133 dB, power requirement: 1.5 to 12 VDC. The microphone shall be fitted with a 1.5 m (5 ft.) cable and its net (exclusive of the cable)/shipping weight shall be 28/150 grams (0.99/5.29 oz.). Available versions: HC 577 L with Mini-XLR connector for AKG wireless pocket receivers, foam and metal screen windscreens in several colors are also available.



Nazad na kategoriju Pilot