left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


KV2 Audio

VHD2000

Šifra Proizvoda: 80246

Napiši prvi komentar za ovaj proizvod





call

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za komad.

Kratak opis

Control and amplification unit for the VHD2.0 Three-way, rack-mounted unit containing high frequency, mid frequency and mid-bass amplifiers, houses all processing and control electronics for the subwoofer system. Our own hybrid signal processing brings together the very best technology available from both the analogue and digital worlds to offer complete audio system control, equalization, overdrive protection, thermal protection and user adjustable set up parameters. The VHD2000 is ‘Line Driver Ready’ and has its own input impedance selector on the front panel to accurately match up the input impedance to the output of any mixer used. Full Range setting for running a VHD2.0 down to...

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

VHD2000 - System Control and Amplification

 

  • Control and amplification unit for the VHD2.0
  • Three-way, rack-mounted unit containing high frequency, mid frequency and mid-bass amplifiers, houses all processing and control electronics for the subwoofer system
  • Our own hybrid signal processing brings together the very best technology available from both the analogue and digital worlds to offer complete audio system control, equalization, overdrive protection, thermal protection and user adjustable set up parameters
  • The VHD2000 is ‘Line Driver Ready’ and has its own input impedance selector on the front panel to accurately match up the input impedance to the output of any mixer used
  • Full Range setting for running a VHD2.0 down to 60Hz, useful for many speech and playback applications where subwoofers are not needed, and an electronic ‘Tilt’ function which will electronically tilt the VHD2.0 Mid high cabinet down by 10°
 
VHD2000 - System Control and Amplification
 
 

Features

 

  • Three way modular, 2900W Control and Amplification System for use specifically with VHD series modules
  • High Frequency, 300W, Class AB, push-pull low intermodulation amplifier with transformer balanced outputs
  • Mid Frequency, 1000W, high efficiency, wide power bandwidth amplifier
  • Mid Bass, 1600W, high efficiency, current enhancing switching amplifier
  • Setup provides two channel selection and control of different VHD subwoofer combinations, or full range mode, with level control +/- 6dB and two rear mounted line level subwoofer outputs to feed a VHD 3200 subwoofer amplifier
  • Complete, on board speaker management system including equalization, time alignment, crossover filters, amplifier overdrive protection, system set-up and output level controls
  • Newly developed PDM 20MHz sampling, digital delay alignment system setting new standards for audio performance and dramatically increasing phase response precision and definition
  • AC soft start circuitry with ON/OFF AC breaker switch provides thorough power protection
  • Comprehensive front-to-back cooling system features chassis sealed pcb’s for improved reliability
  • Two per side switch engages a specific set of filters and operating parameters for larger scale events when using an extra VHD 2000 and VHD 2.0 per side
  • Individual signal inserts for Mid/High, Subwoofer A, and Subwoofer B providing flexibility for insertion of signal processing or feeding from auxiliary sources as required
  • Front panel Input Impedance selector provides selection of optimal input impedance when used with a KV2 Audio LD4 Line Driver

 

Output Channels

 

Number of Channels 1

 

High Frequency Amplifier Specification

 

Type Class AB Push-Pull low IM Mosfet design, transformer balanced output
Rated Continuous Power 300W
Distortion < 0.05%
Operating Bandwidth 2.2kHz ÷ 30kHz

 

Mid Frequency Amplifier Specification

 

Type High Efficiency, High power bandwidth
Rated Continuous Power 1000W
Distortion < 0.05%
Operating Bandwidth 450Hz ÷ 2.2kHz

 

Mid-Bass Frequency Amplifier Specification

 

Type High efficiency, Low frequency, Current-enhancing switch mode
Rated Continuous Power 1600W
Distortion < 0.05%
Operating Bandwidth 100Hz ÷ 450Hz

 

Signal Input

 

Input Sensitivity 1.0V RMS
Input Impedance 10kΩ ÷ 50Ω "Line driver ready"
Signal Output Main Through OUT, Sub A and B OUT
Insert Mid/High, A Sub, B Sub

 

Speaker Output

 

Speaker Output EP6

 

Features

 

Level Control +/- 6dB
Subwoofer Level Control Sub A +/- 6dB, Sub B +/- 6dB
System setup 6x
Full Range Mode VHD2.0: 60Hz÷22kHz, Sub MUTE
Two per Side switch Double system - EQ

 

Power

 

Power Connector Neutrik PowerCon®
Operating Voltage 115V / 230V / 250V
Operating Voltage Range 100÷120V@60Hz | 205÷240V@50Hz | 225÷260V@50Hz
Recommended Amperage 20A 115V | 10A 230V | 10A 250V
Soft Start YES
Protection Thermal breaker
Cooling 2x temperature controlled fans

 

 

Physical Dimensions

 

Height 177.8mm (7.0")
Width 483mm (19.0")
Depth 495mm (19.5")
Weight 30kg (66lbs)

 Scroll To Top