left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


ART Pro Audio

ProChannel II

Šifra Proizvoda: 296

Napiši prvi komentar za ovaj proizvod





449 €

Dostupnost:

Na lageru


Prikazana cena je za komad.

Kratak opis

The ART Pro Channel II™ uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

The ART Pro Channel II™ uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

 

The ART Pro Channel II™ 's semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.

 

 

Features

 

 

 

  • Fully Featured discrete class "A" Tube Microphone Preamplifier
  • 1/4" High Z input on the front panel
  • Selectable plate Voltage
  • Smooth musical sounding Optical Compressor
  • Separate Attack and Release controls
  • Auto/Manual Attack/Release switch
  • Parametric EQ
  • Large VU and LED meters
  • Multi section clip monitor LED
  • Selectable Source switches for VU signal monitoring of any section of the unit
  • Two insert loops
  • +4/-10 dB switch for optimal signal output levels
  • Toroidal power transformer for low noise

 

 

Specifications

 

 

 

Input Impedance

 

 

 

  • Mic: 150 to 3.4K Ohms, variable
  • Instrument: 2.5M Ohms
  • Preamp Insert: .5K Ohms

 

 

Output Impedance

 

 

 

  • Balanced Output: 600 Ohms balanced
  • Unbalanced Output: 300 Ohms
  • Insert Outputs: 300 Ohms

 

 

Frequency Response

 

 

 

  • Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
  • THD @ 1 KHz: <0.15% typical
  • THD @ to to 20 KHz: <0.033% typical

 

 

Equivalent Input Noise

 

 

 

  • Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
  • Instrument: -109 dBu, Input shortened, Max gain, "A" weighted

 

 

Maximum Input Level

 

 

 

  • Mic: +18dBu balanced
  • Instrument: +15 dBu

 

 

Maximum Gain

 

 

 

  • Mic: 70dB (XLR to balanced output)
  • Instrument: 64 dB (1/4" to balanced output

 

 

Maximum Output Level

 

 

 

  • Balanced: +24 dBu
  • Unbalanced: +20 dBu
  • Output Level At Meter 0 VU: +4 dBu/-10dBV

 

 

Preamp

 

 

 

  • Microphone Gain: 0 dB to +56 dB
  • Instrument Gain: +3 dB to +50 dB
  • Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave

 

 

EQ

 

 

 

  • Boost/Cut: +/- 12 dB on each band
  • Low Freq. Tuning: 40 / 120 Hz Selectable
  • MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
  • MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
  • High Freq. Tuning: 6 KHz / 18 KHz Selectable

 

 

Compressor / Limiter

 

 

 

  • Attack Time: 250 uSec. to 100 mSec.
  • Release Time: 00 mSec to 3 Sec.
  • Compression Ratio: 2:1 to 30:1
  • Dimensions (H x W x D - in): 3.5 x 19.0 x 9.2
  • Dimensions (cm): 8.9 x 48.3 x 23.3
  • Weight (lbs/kg): 11/5
  • Power Requirements: USA - 105 to 125 VAC/ 60 Hz; Export units configured for country of destination.

 

Note: 0 dBu = 0.775 VRMS, 0 dBV = 1 VRMS

 Scroll To Top