left right

Dobrodošli na Player e-shop!


Garancija najnizih cena

pobedićemo svaku konkurentsku cenu!


ADAM AUDIO

S7A MK 2

Šifra Proizvoda: 50216

Napiši prvi komentar za ovaj proizvod





call

Dostupnost:

Uskoro na lageru, proverite mogućnost porudžbine Proverite mogućnost porudžbineMogućnost porudžbineUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u prodavnici, ali ga je moguće naručiti.
Molimo Vas da proverite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Proveru možete izvršiti putem telefona:
011/33-47-615
011/33-47-442
011/37-39-701
011/37-74-968


ili emailom:
info@player.rs


Prikazana cena je za komad.

Kratak opis

The ultimate main monitors The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAM's main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means...

Pogledaj proizvod iz više uglova:


*Istaknute cene su informativnog karaktera.
Pre svake kupovine i poručivanja ovog uređaja, pozovite jednu od Player prodavnica putem navedenih brojeva telefona, kako biste dobili najbolju cenu.

The ultimate main monitors

The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAM's main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.

Advanced D‘Appolito-array

The arrangement of the seven discrete loudspeakers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitor's new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are - besides the dispersion characteristics mentioned previously - two more advantageous results:

There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120 dB are handled without offending the ear.
Impulse Coupling

In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff 25 mm thick aluminum honeycomb plate, which is acoustically dead - thereby providing an extremely mechanically stable bridge to the cabinet (IC). As the drivers are much better fixed this way their time behavior (and consequently their clarity) is audibly and measurably improved.

Amplifiers

Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies. These are combined in an extremely powerful (1000 and 1500 W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs. The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.

The front panel

Numerous controls on the front panel introduce a new degree of control for main monitors.

Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200HZ) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.

In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the DolbyTM X-curve has to be applied.

Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.

S7A Mk2

The S7A Mk2 is the ‘big brother' of the S6X and ADAM's most spectacular studio monitor to date. With a whopping combined 1500 W of onboard power (rms), this monitor reaches SPL peaks of 128 dB at a distance of 1 meter. The big bass diaphragms produce even more volume even at lowest pitches down to 20 Hz.

Both 15" subwoofers are driven by 500 W rms each, while 250 W rms units are powering all the other frequency bands.

The benchmark

Quite simply, we feel that the S7A Mk2 is the benchmark of what is possible in the state of the art full range active professional monitoring. It incorporates all of the ADAM inventions and designs, as well as the best materials available. This fusion of power and capacity with precision and accuracy results in unparalleled performance in professional monitoring.

The S7A Mk2 is ADAM's contribution to the best possible studio monitor available. The proof is in the listening - we encourage you to hear for yourself.

Subwoofer  
Number 2
Basket Ø 15" (380 mm)
Voice coil Ø 4" (100 mm)
Cone material Paper
Woofer  
Number 2
Basket Ø 9" (228 mm)
Voice coil Ø 2" (50 mm)
Cone material HexaCone
Midrange  
Number 2
Type X-ART
Cone material HexaCone
Diaphragm area 26 inch² (16800 mm²)
Equiv. Diaphragm Ø 5.5" (146 mm)
Velocity transform ratio 3.5:1
Diaphragm weight 0.7 g
Tweeter  
Number 1
Type X-ART
Diaphragm area 4 inch² (2420 mm²)
Equiv. Diaphragm Ø 2" (56 mm)
Velocity transform ratio 4:1
Diaphragm weight 0.17 g
Built-in Amplifiers  
Subwoofer 1
Type PWM
Amp. power RMS / music 1000 W / 1400 W
Subwoofer 1
Type PWM
Amp. power RMS / music 500 W / 700 W
Woofer 1
Type PWM
Amp. power RMS / music 500 W / 700 W
Woofer 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Midrange 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Tweeter 1
Type PWM
Amp. power RMS / music 250 W / 350 W
Control panel  
Input Sensitivity ±10 dB
EQ 80 Hz (Quality / Hz / Level) 3 x 0.2 - 20 / 20 - 200 / ±12 dB
High Shelf EQ > 6 kHz ±6 dB
Low Shelf EQ < 150 Hz ±6 dB
Sub Gain ±4 dB
Mid-Woofer Level ±2 dB
Mid level ±2 dB
Tweeter gain ±4 dB
Input connectors  
Analog XLR
Location Front / Rear switchable
General data  
Panel Front
X-Curve-Filter yes
Frequency response 20 Hz - 50 kHz
THD > 80 Hz ≤0.5 %
Long term output ≥128 dB
Max. peak ≥138 dB
Crossover frequencies 65 / 800 / 3100 Hz
Input impedance 10 KOhm
Weight 575.4 lb (261 kg)
Height x Width x Depth 35.5" (900 mm) x 47" (1200 mm) x 26.5" (670 mm)
Warranty 5 Years
Delivery contents

Power cord, Manual

 Scroll To Top