4-Channel Power Amplifier
- Independent Bassand Treblecontrol for each channel.
- Three power configerations ; four channe!4 X 200W, 3 channel 2 X 200W + 1 X 600W
- or 2 channel 2X600W.
- Individual fourchannel inputs and switchable global bus input, independent volume control for 4 channels, recessed Treble and Bass control,
- Independent signal indication, independent clipindication. *Bridge modeswitch forchannel 1&2 andchannel 3&4, bridge and common protection
- LED indicators. •Balance BUS IN available.
- 8 Ohm stereo 4X200W
- 4 Ohm stereo 4X300W
- 8 Ohms bridged 2X600W
- Weight 16kg
Minimum Guaranteed Power
- 1 kHz with 0.5%THD
- 4-Channel, 8 ohms 4X200W
- 4-Channel, 4 ohms 4X300W
- Bridge -stereo, Sohms 2X600W
- Performance Sensitivity (volts RMS) for full rated power at 8 ohms 0.775V
- Frequency Response (at 1 watt,20Hz - 25kHz) + OdB, -0.5dB
- Phase Response (at 1 watt, 20Hzto20 kHz) + 10' ,-20"
- Signal to Noise Ratio below rated power A-weighted >100dB
- Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 20 kHz sSO.1%
- Interrnodulation Distortion (IMD) 60 Hz and 7kHz at 4:1 .fromfull rated outputto -35 dB sSO.05%
- Damping Factor (8ohm): 20 Hzto 400 Hz ^200
- Input Impedance (nominallybalanced, nominally unbalanced) 20 kilohms, lOkilohms
- Load Impedance (Note: Safe withall types ofloads)
- 4-Channel Bridge-Stereo 4-8 ohms 8 ohms
- AC Line Voltage and Frequency Configurations Available (+10%) -220-240 V and50/60 Hz
- AC Line Current (both amplifiers draw no more than 90 wattsat idle) 8A
- Ventilation Flow-through ventilation fromfront to back
- Cooling Proportional speed fan
- Dimensions H x W x D: 89mmX483mmx496mm
- Net Weight/Shipping Weight 16kg/19kg