Dobrodošli u Player svet! Prijavi se ili Registracija

NEUTRIK NC5MX

NEUTRIK NC5MX


Proizvođač: NEUTRIK NC5MX
Dostupnost: Nema na stanju
Šifra Proizvoda: 2203
Prikazana cena je za komad.

5 pole male cable connector, Nickel housing, silver contacts. The \"industry standard\" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. 5 pole male cable connector with Nickel housing and silver contacts. Features & Benefits Rugged zinc diecast shell, long lasting and durable Chuck type strain relief system for secure clamping of cables Boot with rubber gland gives high protection against bending stresses Coloured rings and boots available for coding and marking UL recognized components Product Connector Type XLR Gender male Electrical Capacitance between contacts ≤ 7 pF Contact resistance ≤ 3 mΩ Dielectric strength 1,5 kVdc Insulation resistance > 2 GΩ (initial) Insulation resistance > 1 GΩ (after damp heat test) Rated current per contact 7,5 A Rated voltage 50 V Mechanical Cable O.D. 3.5 - 8.0 mm Insertion force ≤ 20 N Withdrawal force ≤ 20 N Lifetime > 1000 mating cycles Wire size max. 1.0 mm² Wire size max. 18 AWG Wiring Solder contacts Locking device latch lock Material Boot Polyuretan Bushing Polyamide (PA 6 15% GR) Contact plating 2 µm Ag Contacts Brass (CuZn39Pb3) Insert Polyamide (PA 6.6 30 % GR) Locking element Zinc diecast (ZnAl4Cu1) Shell Zinc diecast (ZnAl4Cu1) Shell plating Nickel Strain relief Polyacetal (POM) Environmental Approvals UL Flammability UL 94 HB Standard compliance IEC 61076-2-103 Protection class IP 40 Solderability Complies with IEC 68-2-20 Temperature range -30 °C to +80 °C


€ 10.71

5 pole male cable connector, Nickel housing, silver contacts.

The \"industry standard\" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

5 pole male cable connector with Nickel housing and silver contacts.

 

Features & Benefits

  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
 
Product
Connector Type XLR
Gender male
Electrical
Capacitance between contacts ≤ 7 pF
Contact resistance ≤ 3 mΩ
Dielectric strength 1,5 kVdc
Insulation resistance > 2 GΩ (initial)
Insulation resistance > 1 GΩ (after damp heat test)
Rated current per contact 7,5 A
Rated voltage 50 V
Mechanical
Cable O.D. 3.5 - 8.0 mm
Insertion force ≤ 20 N
Withdrawal force ≤ 20 N
Lifetime > 1000 mating cycles
Wire size max. 1.0 mm²
Wire size max. 18 AWG
Wiring Solder contacts
Locking device latch lock
Material
Boot Polyuretan
Bushing Polyamide (PA 6 15% GR)
Contact plating 2 µm Ag
Contacts Brass (CuZn39Pb3)
Insert Polyamide (PA 6.6 30 % GR)
Locking element Zinc diecast (ZnAl4Cu1)
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Nickel
Strain relief Polyacetal (POM)
Environmental
Approvals UL
Flammability UL 94 HB
Standard compliance IEC 61076-2-103
Protection class IP 40
Solderability Complies with IEC 68-2-20
Temperature range -30 °C to +80 °C



Nazad na kategoriju Konektori