• Lubricating oil LUBE IT for the smooth operation of the turntable bearing (Pre-filled applicator with a filling content of 5 ml)

• New drive belt for precise platter rotation speed

• Replacement tip for the Ortofon OM10 pickup with an elliptical tip

The permanent maintenance of sound quality and the extension of the service life of each gramophone is conditioned by regular maintenance. During playback, some essential parts of the turntable, necessary for trouble-free operation, gradually wear out. In particular, the pickup tip, drive belt and bearing have a limited life depending on the playing time and operating environment. In the bearing, the lubricating oil dries up, in the drive belt, it stretches or even breaks, and in the transfer case, the tip wears out, which tends to limit the ability to read the groove and reduce the sound quality. The Pro-Ject Maintenance Set Advanced contains just the aforementioned specific parts needed for simple and quick maintenance and is optimized for owners of Pro-Ject DEBUT III turntables and its model versions with the Ortofon OM10 portable. Maintenance can be done by each user himself and does not require any specific knowledge or additional settings or tools.

LUBE IT - High-tech lubricating oil for Pro-Ject turntables with a non-inverting bearing

A record player is a delicate and precise instrument that needs proper care. The motor drives the platter and over time, without the necessary lubrication, the bearing will begin to wear. The lubricant itself also wears out, which is caused by many factors such as climate and humidity. LUBE IT oil helps to keep the bearing in perfect condition, ensuring smooth playback and low speed fluctuation values. With Lube it, you can permanently keep your turntable bearing smooth and ensure perfect playback even after many years of use.

Drive belt - flat 4 x 0.9 mm, Ø 158.9 mm

The drive belt is made of high-quality material and is intended for the model series of Pro-Ject DEBUT turntables with a turntable. To extend the life of the drive belt, we recommend that you do not touch it with your bare hands, but use a special plastic key (supplied as a standard accessory with Pro-Ject turntables) during installation or when changing the speed manually.

Replacement tip for Ortofon OM10 pickups

Original replacement stylus with an elliptical tip for the Ortofon OM10 portable. Part replacement is very simple. It is enough to carefully remove the replaceable front part from the transfer case with adequate force (by pulling it towards you in the direction of the axis of the transfer case) and simply put on a new tip. No specific knowledge is required for installation, nor is it necessary to re-set up the handset.