Do besplatne dostave Vam je ostalo još 5.000,00 RSD
+
×

PRO-JECT Debut Carbon Upgrade Set

Šifra: 18284
Na stanju
47.880,00 rsd
39.900,00 rsd (Bez PDV-a)
Iznos rate:

Garantujemo najnižu cenu!

Količina

Ukoliko želite da platite na rate kreditnom karticom, molimo Vas da izaberete broj rata.

Važi za kreditne kartice logo_banka

Broj rata:

Dostupno u prodavnici:
  • Svetogorska 9, Beograd
Prijavi povoljniju cenu Obavesti me ako cena padne Postavi pitanje
Opcija:

Special upgrade set of accessories for Pro-Ject DEBUT CARBON turntables - Acryl it, 2M-Silver tip and VTA it

 

An economically advantageous set of accessories for the upgrade of the Pro-Ject DEBUT CARBON turntable consisting of an ACRYL IT acrylic platter , a PICK IT 2M-Silver carrying case and a VTA IT shoulder spacer .

 

If you want to upgrade the sound qualities of your Pro-Ject Debut Carbon turntable, this accessory kit may be the easiest solution. No special experience is required to change the plate and the installation is very simple. When replacing the existing pickup (originally supplied Ortofon 2M-Red) with a better quality 2M-Silver, precise adjustment and alignment is required. The sound benefit is really noticeable. The VTA it spacer then requires specific knowledge of the arm setting and the installation of the "VTA it" should therefore be carried out by an experienced technician. Unauthorized installation voids the turntable's warranty.

 

ACRYL IT - acrylic turntable with zero resonance - diameter 300 mm, weight 1.3 kg

 

The ACRYL IT plate is made of acrylic with a matte surface and high density, which does not transmit any resonances. This is an ideal upgrade not only for DEBUT turntables.


The change is easy: Just replace the original metal plate with Acryl IT. Unlike metal platters, where it is necessary to use a felt pad between the plate and the platter to dampen the resonance of the metal, with an acrylic platter, you can place the turntable directly on its surface, without an additional intermediate layer. Milling for the record label is also included.


The acrylic plate not only enhances the aesthetic point of view, but thanks to zero resonances it brings audibly better sound results.


Benefit: More accurate sound with better spatial definition.

PICK IT 2M-SILVER - portable record player

 

The standard 1/2" mount pickup is specially developed for the Pro-Ject on the ORTOFON 2M series platform with technology that allows for the same level of flat frequency response similar to moving coil MC pickups.

 

The Pick-It 2M Silver combines proven technologies with a simple assembly procedure, allowing installation on almost all available turntables.

 

Thanks to the MM principle, the Pick-It 2M Silver is compatible with most phono preamplifiers.

 

The transmission is completely unique in this price category due to the fact that it uses an internal silver-plated copper coil. The result is a dynamic and analytical sound with excellent rendering of space and detail.

 

VTA IT - 1.5 mm shoulder spacer

 

With the Pro-Ject VTA IT, the vertical tracking angle of the arm can be optimized. The need for a new setting may occur when upgrading the plate, when using a pad for a plate with a larger or smaller height (e.g. Cort it), or when changing the transfer case. The VTA IT arm pad is compatible with Debut I-III, Debut Carbon, Debut Carbon EVO, Essential I-III turntables (only in standard configurations). Installation requires a #1 Philips screwdriver and a 5.5mm nut wrench.

 

Benefit: Optimum adjustment of the vertical groove tracking angle = more detailed presentation.

Ocena:

Vezani artikli


Srodni proizvodi