ARCAM SA10 Integrisano Pojačalo
*Cena sa popustom može da se ostvari ukoliko se plaća gotovinski, virmanom (preko računa) ili odmah debitnom i kreditnom karticom.
Garantujemo najnižu cenu!
- Futoški put 1, Novi Sad
- Centralni magacin
The most awaited replacement for the multi-award winning A19 amplifier, the Arcam SA10 amplifier is an ultra-low distortion type Class A/B amplifier that will loom over its predecessor when it comes to performance. The Arcam SA-10 has been designed to set new standards, whether your music is playing via compact disc or streamed from a computer, and has become the new standard-setter in digital audio. The SA10 features five analogue inputs (1x line/MM switchable) and three digital inputs (2x SPDIF and 1x optical). This is a powerful integrated amplifier that has become well known for its fast dynamics, and thanks to the ESS Sabre 9016 DAC, this amplifier offers optimum a superb, low-jitter digital performance.
This Integrated amplifier works hard to maintain excellent stereo separation in order to achieve a wide and deep musical sound stage, all while minimising the interference. The SA10 Integrated amplifier features both a pre amplifier and a power amplifier for source switching, volume control and superior amplification.
A singer’s sharp intake of breath before hitting the chorus, a guitarist’s fingers sliding against the strings – it’s those seemingly minor details that can bring music to life. Fish out one of your all-time favourite albums and play it through a Bluetooth speaker, and guess what? Its sounds like a Bluetooth speaker. Play it through the SA10, and it’s as close to hearing the artist’s performance as you’re likely to get. There’s always joy in digging out an old recording you haven’t heard in years. With the HDA range, it’ll feel like hearing it forthe first time.
- Extremely efficient class A/B amplification
- 50W of power per channel
- 5 analogue inputs including phono
- 3 digital inputs
- 32-bit DAC,Sabre ESS9016K2M
- Full I/P control
- Total harmonic distortion + noise = 0.003%
| Both Channels, 8Ω, 20Hz—20kHz | 50W |
|---|---|
| Single Channel, 4Ω, at 1kHz | 90W |
| Harmonic Distortion, 80% Power, 8Ω at 1kHz | 0.003% |
| Input Sensitivity At 1kHz | 5mV |
| Input Impedance | 47kΩ + 100pF |
| Frequency Response (ref. RIAA curve) | 20Hz – 20kHz ± 1dB |
| Signal/Noise Ratio (A-wtd) 50W, ref. 5mV Input | 80dB |
| Overload Margin, Ref. 5mV at 1kHz | 21dB |
| Nominal Sensitivity | 1V |
| Input Impedance | 10kΩ |
| Maximum Input | 6Vrms |
| Frequency Response | 20Hz – 20kHz ± 0.2dB |
| Signal/Noise Ratio (A-wtd) 50W, ref. 1V Input | 106dB |
| DAC | ESS9016K2M |
| Frequency Response | 20Hz - 20kHz ± 0.05dB |
| Total Harmonics Distortion + Noise | 0.0007% |
| Signal/Noise Ratio (A-wtd) | 115dB |
| Supported Sample Rates (Optical) | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz |
| Supported Sample Rates (Coaxial) | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
| Bit Depth | 16-bit – 24-bit |
| Nominal Output Level | 630mV |
| Output Impedance | 230Ω |
| Maximum Output Level Into 600Ω | 5Vrms |
| Output Impedance | 1Ω |
| Load Range | 16Ω – 2kΩ |
| Mains Voltage | 110–120V or 220–240V, 50–60Hz |
| Maximum Power Consumption | 350W |
| Dimensions W x H x D (including feet, control knob and speaker terminals) | 433 x 87 x 310mm |
| Weight (Net) | 8.4kg |
| Weight (Gross) | 10.7kg |
| Supplied Accessories | Mains leads Remote control 2 x AAA batteries |
-
- predrqg vuckovic
- 2021-04-14
- vrhunsi zvuk , ludilo uredjaj
-
- predrag vukovic
- 2021-04-15
- savrseno
-
- Player Plus doo
-
- Pedja
- 2021-05-20
- Odlicno pojacalo!!! Cvrsto, tesko, robusno....jednostavnog i svedenog, ali, bar za mene, prelepog dizajna. Sto se zvuka tice, svaki komentar bi bio samo bledi pokusaj da se docaraju njegove mogucnosti, bar za pocetak koriscenja. Verujem da ce se tek pokazati u pravom svetlu, kad ga budem uskoro upario sa pravim zvucnicima, takodje sa ostrva... Od mene i pohvala za momka iz Player-a i odlicnu komunikaciju...
Vezani artikli
Srodni proizvodi
