ARCAM A29 Integrisano Pojačalo
*Cena sa popustom može da se ostvari ukoliko se plaća gotovinski, virmanom (preko računa) ili odmah debitnom i kreditnom karticom.
Garantujemo najnižu cenu!
- Svetogorska 9, Beograd
Arcam’s A29 integrated amplifier represents another major step forward for Arcam’s stereo audio engineering. We set out to incorporate everything we have learnt in almost 40 years to deliver an amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.
With a class G amplifier, toroidal based power supply, acoustically damped chassis, complementary transistor output stages and exceptionally low levels of distortion and noise the A29 is capable of reproducing music with all its original authority and detail. Rest assured you will be hearing the music just as the artist intended.
The A29 have been designed to leapfrog the competition with a massive 80 watts per channel into 8 ohms and 175 watts into 4 ohms, allowing for huge extra power reserves from our latest generation class G topology that is both clever and efficient. During normal operation, distortion is measured in less than one part per million so that this massive power is deliver with total control and finesse.
There have been great strides made in improving audio sources and loudspeakers in recent years and the time is right to match them in the field of amplifier design. This ground breaking amplifier is a must audition amplifiers for music lovers who understand that power is nothing without control.
Spec:
| Continuous power output (20Hz—20kHz at 0.5% THD), per channel | |
| Both channels, 8Ω, 20Hz—20kHz | 80W |
| Single channel, 4Ω, at 1kHz | 175W |
| Harmonic distortion, 80% power, 8Ω at 1kHz | 0.003% |
| Inputs | |
| Phono (MM) cartridge: | |
| Input sensitivity at 1kHz | 5mV |
| Input impedance | 47kΩ + 100pF |
| Frequency response (ref. RIAA curve) | 20Hz - 20kHz ± 1dB |
| Signal/Noise ratio (Awtd) 50W, ref. 5mV input | 80dB |
| Overload margin, ref. 5mV at 1kHz | 23dB |
| Inputs: | |
| Nominal sensitivity | 1V |
| Input impedance | 10kΩ |
| Maximum input | 4.6Vrms |
| Frequency response | 20Hz - 20kHz ± 0.2dB |
| Signal/noise ratio (Awtd) 50W, ref. 1V input | 105dB |
| Preamplifier output | |
| Nominal output level | 735mV |
| Output impedance | 230Ω |
| Headphone output | |
| Maximum output level into 600Ω | 5V |
| Output impedance | 1Ω |
| Load range | 16Ω – 2kΩ |
| Accessory power output | |
| 2.1mm DC connector | 6V, 500mA |
| General | |
| Mains voltage | 110-120V or 220-240V |
| Power consumption (maximum) | 500W |
| Dimensions W x D x H (including feet) | 433 x 275 x 85mm |
| Weight (net) | 9.2kg |
| Weight (packed) | 10.7kg |
| Supplied accessories | Mains lead |
| CR902 remote control | |
| 2 x AAA batteries | |
| Accessory power cable |
|
Vezani artikli
Srodni proizvodi
