Key Features
XLR and RCA inputs for each of eight channels of amplification with 150 watts per channel output into 8 ohms, with a maximum output of 1500 watts.

Each pair of output channels can be bridged, allowing the amp to provide power to virtually any multi-channel speaker configuration, either on its own or with an A35.2 stereo amplifier.

For an extraordinarily powerful two-channel bi-amplified system, one fully bridged A35.8 delivers peak power of 4 x 375 watts or 750 watts per pair per channel.

Additional convenience features include auto-sense turn-on from standby and auto standby after an absence of input signal for twenty minutes which can be turned off allowing the A35.8 to remain on indefinitely if preferred. 

Amplifier technology
The ingenious design of the A35.8 circuit layout provides the most direct delivery and even distribution of power from the power supply to the amp modules tucked into heatsinks that isolate them from any power supply noise. In turn, this innovative construction isolates the input and output stage from any noise the amp modules might produce. Input and output signals are delivered to and from the amp module through an uninterrupted ribbon of circuit board threaded through a channel in the heat sinks for the shortest possible signal path.

System Configurations
The bridging capabilities of the A35.8 allow it to be used in a variety of system configurations, with or without the addition of a stereo amplifier, to suit most multi-channel system requirements. A few examples:

5.1, 7.1 and 5.1.2 channel systems can be powered by a single A35.8
5.1.4, 7.1.2, 7.1.4 channel systems can be driven by combining an A35.8 with a number of A35.2 stereo amplifiers
9.1.6 and 13.1 Auro 3D systems can be configured using two A35.8 amplifiers
For more details go to the Dive In section in menu above.

Our design philosophy
Primare products embody the Scandinavian design ideal of lagom – that sense of not too much or too little, but just right; everything in balance, proportion, and harmony.

Output Power
8x 150W 8 ohms / 8x 300W 4 ohms
XLR
x 8
RCA
x 8
12V Trigger
2 x 3.5mm input/output
RS232
outboard system control port
Dimensions
430 x 400 x145 mm (wxdxh)
Weight
15 Kg
Finishes
black or titanium