The PA2240BP is a bridgeable and ultra-reliable 2-channel 100 volt power amplifier that can be used in all your big 100 volt projects. It can be configured as a 2-channel amplifier (2 x 240 watts) or it can be bridged into a 1 x 480 watts power amplifier if you need to power a big gro...

The APart PA240P is, in addition to the MA mixig amplifier series, a fully equipped constant voltage power amplifier that will meet all of your requirements. Besides high reliability and the basic functions of a power amplifier the PA240P excels above similar products by the inclusion of its e...

The Apart PC1000RMKII is a professional multisource CD/USB/SD-card music player, equipped with balanced and unbalanced analog outputs, coaxial and optical digital outputs and a RS232-port for use in integrated systems.The maximum analog output level can be preset at the back of the PC100...

The Apart PCR3000RMKIII is a professional multisource CD/USB/SD-card music player with integrated FM RDS and DAB+ tuner. In addition the unit now also has an internal Bluetooth receiver which can be connected to any music source, smartphone or computer equipped with a Bluetooth connection. Fur...

Stereo pre-amplifier/mixer with 2 stereo volume zones  

REVAMP4120T is a professional 4-channel digital power amplifier with 4 x 120 watts output power @ 100 volt (or @ 4 ohms), but the unit is also bridgeable to 2 x 240 watts @ 100 volt (or @ 4 ohms). The unit incorporates a high efficient SMPS power supply, outputs with efficient Class D output t...

REVAMP4240T is a professional 4-channel digital power amplifier with 4 x 240 watt output power @ 100 volt, but the unit is also bridgeable to 2 x 480 watts @ 100 volt. The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology.

ROCK20Rock design outdoor loudspeaker

Type : Dual cone Woofer : 8\" Impedance : 8 Ohm Transformer Power Tappings : 5 - 10 - 20 watts (4k - 2k - 1k - 500 Ohm) RMS Power 100V AES Rated : 20 watts Music : 30 watts SPL 1 w/1 m : 99 dB Frequency Range : 80 Hz - 18 kHz Dispersion :...

The T20 is an 8 ohms to 100 volt transformer. By using the T20 you can change a standard 8 ohms loudspeaker into a 100 volt loudspeaker. The T20 has several power tappings from 2,5 up to 20 watts.

ZONE4RZONE4 wall control panel for music level & source selectZONE4R is a remote control panel for the ZONE4, Apart's multifunctional 4-zone pre-amplifier. The control panel offers music level control, source selection and microphone mix level control. A clear digit...

The T8™ (Transformer Eight) a high quality totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8's audio transformers have flat and wide frequency response and han...

S8-3Way – Eight Channel Three-Way Mic SplitterThe ​S8-3WAY​ eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.Each channel prov...

2way Crossover with Subwoofer OutThe CX311 two-way stereo crossover network has an additional subwoofer output for low-end frequency reinforcement. It employs 24dB/octave state-variable, Fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies which i...

Six Channel Stereo MixerThe ART MX624 Six Channel Stereo Mixer with Two Zone Outputs is a versatile rack mount mixer that combines six independent input channels and routes them to two stereo zone outputs.The first channel can be used to control, via a front-panel switch, a d...

The ART MX822 Eight Channel Stereo Rackmount Mixer is a versatile eight input mixer for studio, live sound or installation applications. Each input accepts a mono or stereo signal and provides independent level, pan and effects send controls. Channel One includes a switchable mic/line source s...

The PDB passive direct box from ART is a roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows for connectio...

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedanc...