1" exit lightweight, low-profile ferrite magnet compression driver with 1" copper clad aluminium voice coil

1" exit neodymium compression driver with 1.4" copper clad aluminium voice coil 20Wrms power handling (AES standard) and 104dB sensitivity Copper sleeve on pole reduces inductive rise for improved HF performance Ferrofluid in magnet gap prevents sensitivity loss through therm...

Celestion CDX1-1445 Ferrite 1" Compression Driver 20WCelestion's compact and versatile CDX1-1445 1" high frequency driver is the result of the company's extensive experience, and its commitment to rigorous technical analysis. The driver's advanced non-metallic PETP diaphragm provid...

2.200Hz recommended min. crossover freq (12dB/oct) Single piece PETP diaphragm and surround Sound Castle diaphragm assembly Flange (CDX1 - 1745) and screw (CDX1 - 1746) fitting versions available

1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coi

8"  low frequency driver providing 94dB sensitivity and 100Wrms    Frequency Response and Impedance Curves

The 0818MR is a high sensitivity, midrange loudspeaker designed for use in large 3-way systems. Its closed-back chassis simplifies cabinet manufacture, eliminating the need for a separate midrange enclosure.Celestion Truvox 0818MR 8" Raw Frame Speaker Features:

12" Bass and mid-range driver providing 97dB sensitivity and 250Wrms    Frequency Response and Impedance Curves

High power double 15” subwoofer with very compact designCan be used for both fixed installations and mobile applicationsThe horn loaded design guarantees a nice, punchy bass reproductionPerfect for clubs, discotheques, stage, rental, Pro-DJ, ...

he APart CMS20T 2-way square built-in loudspeaker is loved by every interior designer for its beautifull shape and perfect sound quality. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm ampl...

CMSUB8 BUILD-IN SUBWOOFERThe APart CMSUB8 stereo ceiling subwoofer is designed to reproduce a fat and deep bass. Featuring dual 8 ohms coils and incorporated passive filter circuitry, the CMSUB8 can be used in almost any situation where extra bass is needed at low to medium sound levels. This ...

Crossover for 2-way systemCrossover Freq.:   7kHz Slope:   12dB/oct. Power RMS:   100W Connectors:   none

Crossover for 2-way systemCrossover Freq.:   4,5kHz Slope:   18dB/oct. Power RMS:   100W Connectors:   none

To connect amps and passive speakers, CORDIAL offers you its CPL LL cable, a highly flexible speaker cable with 2 pins assigned. Attention!Safe operation until 48 Volt max.

To connect amps and passive speakers, CORDIAL offers you its CPL LL cable, a highly flexible speaker cable with 2 pins assigned. Attention!Safe operation until 48 Volt max.

To connect amps and passive speakers, CORDIAL offers you its CPL LL cable, a highly flexible speaker cable with 2 pins assigned. Attention!Safe operation until 48 Volt max.

Ultra-light headstrap microphone (56 g) This version, fitted with a battery support, can be connected directly to a mixing console (mono Jack 6,3 mm) Type: Electret Polar Pattern Unidirectional Freq. Response: 100 Hz - 16 kHz Sensitivity: -67 dB Impedance: Low impedance Operat. Voltage: 1,5V

Ultra-light headstrap microphone (56 g) This version, fitted with a battery support, can be connected directly to a mixing console (mono Jack 6,3 mm) Type: Electret Polar Pattern Unidirectional Freq. Response: 100 Hz - 16 kHz Sensitivity: -67 dB Impedance: Low impedance Operat. Voltage: 1,5V

Ultra-light headstrap microphone (56 g) This version, fitted with a battery support, can be connected directly to a mixing console (mono Jack 6,3 mm) Type: Electret Polar Pattern Unidirectional Freq. Response: 100 Hz - 16 kHz Sensitivity: -67 dB Impedance: Low impedance Operat. Voltage: 1,5V

Ultra-light headstrap microphone (56 g) This version, fitted with a battery support, can be connected directly to a mixing console (mono Jack 6,3 mm) Type: Electret Polar Pattern Unidirectional Freq. Response: 100 Hz - 16 kHz Sensitivity: -67 dB Impedance: Low impedance Operat. Voltage: 1,5V