COLS81slimline column speaker for speech 70/100V

ABS LOUDSPEAKER PROJECT 315 • Bracket included • 2 way bass reflex • 3.5” woofer and 0.5” tweeter • 100V line transformer (Multi Tapp) • Frequency response @-10dB is 100Hz-15kHz • Dispersion HxV 120°x120° • High-pass fi...

600W + 300W - 134dB SPL Active precision coverage vertical arrayMITUS 206 LA is a 2-way compact line array system boasting an extended performance in the mid and high requencies thanks to the original technology applied, matched with the latest Class D pulse width modulation built-...

OVO5T is design two-way 100 volt or low impedance cabinet loudspeaker that can be used for background music and paging purposes both indoor and (covered) outdoor. This speaker produces 80 watts @ 16 ohms or when used in 100 volt you can select 30 – 15 – 6 – 3 watts with the e...

Eighteen Sound Recone Kit for 18LW1400 8Ohm. This is what you need to repair a blown driver. You will need appropriate adhesives and product knowledge in order to fit this replacement part correctly. We do not provide a consultancy service or fitting advice for this product - this is a replacemen...

PM 1122 Rremote panel Music and MicMix level control : 0-10V operated Music Selector control : DC operated Power supply : only via RJ-45 / CAT-5 to PM1122 main unit General (PM1122R) Dimensions H x W : 80 x 115 mm (40 mm depth beh...

The MITUS 118 SA is single 18” active subwoofer equipped with a B&C neodymium magnet custom woofer.

FBT J-Series J8a Active Full Range Speaker - 8"+1" Driver, biamped switched mode amp, 200W LF + 50W HF RMS class-D,60Hz-20kHz, 90° x 60°, internal DSP with 2 switchable EQ presets, wedge angles, XLR in/out, volume, 2x M5 flying points, 25mm pole mount, black plastic housing. Dimensions...

Sound Reinforcement Monitor160W – 121.5dB SPL NL-4 Neutrik™ Speakon input and link connectorsInternal passive crossover filter with “soft-trip” protection circuits on woofer and compression driverLinear frequency response over the entire di...

Extension Control Keypad

The FR-366 Lavalier Microphone Kit from MXL includes two lavalier microphones (the FR-360 omnidirectional mic and the FR-361 cardioid mic), 2 foam windscreens, and 2 clips. Both included mics have integrated FET preamps and require 48-volt ...

The CMAR6-W is a chlorine and salt water proof two-way 6.5" loudspeaker. This marine speaker has been designed especially to offer superb sound and efficiency even in the most difficult, humid and hot conditions.The fully plastic housing and stainless steel grille of the CMAR6-W loudspea...

Steeped in classic Italian design and acoustic expertise, VERTUShas been created with the aim of extending true line array technology, an undisputed success in the field of professional audio, into a new range of applications within both the live and fixed installation fields.

Amplification for live sound reinforcement speaker systems in clubs, discos, piano bar, conference halls, houses of worship, sports arenas, schools, theatres, mobile D.J. use, recording studio monitors, foreground music reproduction.

AX POWER AMPLIFIERS Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker system...

The EN-SMS6MT6-W is a surface mounted speaker made of powder coated steel (RAL 9010 equivalent), equipped with a high efficiency full range speaker and a multi tap 100-volt transformer, all certified according EN 54-24.

The CL-6TB is a 2-way passive full range ceiling loudspeaker incorporating a 6.5” cone low frequency transducer and a ferrofluid cooled soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line transformer and backcan. The system’s low...

The CL-5T full-range ceiling loudspeaker incorporates a 5.25" double-cone transducer with a 1" voice coil and 70V or 100 V line transformer. The system´s low frequency driver is mounted to a plastic housing that inlcudes the mounting tabs for fixing to ceiling surfaces. The front of the ...