Biamp - Apart CMX 20 T - Plafonski zvučnik
Garantujemo najnižu cenu!
- Futoški put 1, Novi Sad
- Ugrinovački Put 10n, Zemun
CMX 20 T W/BL/SLVThe APart CMX20T 2-way built-in loudspeaker has an exceptional high quality and very good bass response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CMX20T is equipped with a high-quality 20 watt 100 Volt transformer with several power tappings. The loudspeaker has an 8” enforced polypropylen woofer and 1” tweeter. Due to this enforced woofer, the loudspeaker has a very low distortion! It makes the CMX20T very suitable for the distribution of microphone calls and backgroundmusic at a higher volume level. The housing is made of high quality ABS. The woofer is made out of enforced polypropylen with a rubber edge, what makes it moisture-proof. The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden behind the loudspeaker grill, which gives the loudspeaker a modern and striking design). The standard colour is white. From 12 pieces on, the loudspeakers can be painted optionally in any other RAL colour (Ref; PAINT-CM).
Type : 2-way HiFi Pro
Woofer : 8" enforced PP, rubber edge
Tweeter : 1" silk dome
Impedance : 16ohm / 100Volt
Transfo Power Tappings: 2,5 - 5 - 10 - 20 Watts
RMS Power 16ohm
AES Rated: 60 Watts
Music - Program: 100 Watts
RMS Power 100Volt
AES Rated: 20 Watts
Music - Program: 32 Watts
SPL 1w/1m: 93 dB
SPL Max peak: 110 dB
Frequency Range : 50 Hz - 20 kHz
Dispersion:
@ 1 KHz: 180°
@ 4 kHz: 80°
@ 8 kHz: 45°
IP rating : 54
Dimensions :
Cut out: 220 mm
Outside: 244 mm
Depth: 90 mm
Weight : 1.4 Kg
CMX 20 T W/BL/SLV
The APart CMX20T 2-way built-in loudspeaker has an exceptional high quality and very good bass response. It can be used as a 16 Ohm or 100 Volt loudspeaker. In 16 Ohm use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 Ohm amplifier. For 100 Volt use, the CMX20T is equipped with a high-quality 20 watt 100 Volt transformer with several power tappings.
The loudspeaker has an 8” enforced polypropylen woofer and 1” tweeter. Due to this enforced woofer, the loudspeaker has a very low distortion! It makes the CMX20T very suitable for the distribution of microphone calls and backgroundmusic at a higher volume level.
The housing is made of high quality ABS. The woofer is made out of enforced polypropylen with a rubber edge, what makes it moisture-proof.
The loudspeaker is easy to install, due to its simple, quick mounting system (3 screws which are hidden behind the loudspeaker grill, which gives the loudspeaker a modern and striking design).
The standard colour is white. From 12 pieces on, the loudspeakers can be painted optionally in any other RAL colour (Ref; PAINT-CM).
- Type : 2-way HiFi Pro
- Woofer : 8" enforced PP, rubber edge
- Tweeter : 1" silk dome
- Impedance : 16ohm / 100Volt
- Transfo Power Tappings: 2,5 - 5 - 10 - 20 Watts
- RMS Power 16ohm
- AES Rated: 60 Watts
- Music - Program: 100 Watts
- RMS Power 100Volt
- AES Rated: 20 Watts
- Music - Program: 32 Watts
- SPL 1w/1m: 93 dB
- SPL Max peak: 110 dB
- Frequency Range : 50 Hz - 20 kHz
- Dispersion:
- @ 1 KHz: 180°
- @ 4 kHz: 80°
- @ 8 kHz: 45°
- IP rating : 54
- Dimensions :
- Cut out: 220 mm
- Outside: 244 mm
- Depth: 90 mm
- Weight : 1.4 Kg
Vezani artikli
Srodni proizvodi
