NATURAL SOUND

The TG H34 features easy handling, a natural sound and optimal fit. The Supercardioid polar pattern provides a high gain before feedback. The flexible gooseneck allows optimally positioning.

TG PIN OUT

The "TG" version works on pocket transmitters from the TG series, like -100, -500 or -1000. If the microphone is used wired, the "MA PVA" power converter is necessary, it converts the necessary phantom power from the microphone input into an audio wire power supply required by the microphone.

OPUS PIN OUT

The "Opus" version works with pocket transmitters from the various Opus radio series such as -300, -500, -600, -800, -900 and -910. For wired connection to a microphone input with phantom power the "CV 18" power supply is required. "Opus" and "TG" versions are electrically incompatible.

ACCESSORIES

CV 18

Phantom power adaptor for microphones with Opus pin out and 4pin mini-XLR plug to connect to phantom powered mic-input

MA-PVA

Phantom power adaptor with mini-XLR 4pin input

TG H34

Neckworn microphone

FEATURES

• Supercardioid polar pattern
• High gain before feedback
• Lightweight, adjustable neckband
• Flexible gooseneck for optimal positioning
• Rugged “flexible” ear hooks

APPLICATIONS

The TG H34 neckworn microphone ensures maximum freedom of movement and is therefore ideal for all free-hand applications. On stage it is very popular amoung singing dancers, keyboarders or drummers. Furthermore, it is also suitable for all kinds of presentations and sports lessons. The TG H34 features easy handling, a natural sound and optimal fit. The supercardioid polar pattern provides a high gain before feedback. The flexible gooseneck allows optimally positioning the microphone and a wind shield integrated in the microphone reduces wind and popping noise. The TG H34 is supplied with an additional foam wind shield. The TG H34 microphone is available in two versions:

as Opus version it can be connected to the Opus series beltpack transmitters; as TG version it can be used with the wireless microphone systems of the TG series.

For wired applications with phantom power sources the TG H34 must be used with an optional power adapter.

VERSIONS

1 of 2

TECHNICAL SPECIFICATIONS

Transducer type . . . . . . . . . . . . . . . . Condenser (back electret)

Operating principle . . . . . . . . . . . . . Pressure gradient

Polar pattern . . . . . . . . . . . . . . . . . . Supercardioid Frequency response:

Close miking. . . . . . . . . . . . . . . . . 20 - 13,000 Hz

Distant miking (measured at 1 m) . . . 180 - 13,000 Hz

Open circuit voltage. . . . . . . . . . . . . 6.0 mV/Pa (-44.5 dBV)* ±3 dB Nominal impedance . . . . . . . . . . . . . approx. 700 Ω

Load impedance. . . . . . . . . . . . . . . . > 3.5 kΩ

Max. SPL at 1 kHz . . . . . . . . . . . . . . 119 dB*

Equivalent SPL . . . . . . . . . . . . . . . . . 31.5 dB SPL*

Power supply . . . . . . . . . . . . . . . . . . Direct current 1.5 - 9 V

Max. power consumption . . . . . . . . 780 µA Connector . . . . . . . . . . . . . . . . . . . . Mini-XLR, 4-pin, female Dimensions:

Diameter. . . . . . . . . . . . . . . . . . . . 15 mm

Length microphone boom. . . . . . . 95 mm

Weight. . . . . . . . . . . . . . . . . . . . . . . 36 g

*measured with a supply voltage of U = 5 V DC and a load resistance of 2.2 kΩ

OPTIONAL ACCESSORY

CV 18              Power adapter to connect to phantom-powered microphone inputs, for microphones with

Opus pin assignment . . . . . . . . . Order # 475.378

MA-PVA           Power adapter to connect to phantom-powered microphone inputs, for microphones with

TG pin assignment. . . . . . . . . . . Order # 711.098