Sennheiser e 908 B
The Sennheiser e 908 B is a miniature condenser instrument microphone specifically optimized for use with wind instruments, congas, and drums with free-floating suspension systems. The cardioid capsule captures audio in vivid detail and clarity while exhibiting excellent rejection of off-axis noise and feedback. The e 908 B handles high sound pressure levels without peak distortion, enabling close proximity placement without noise.
The miniature capsule remains out of sight during performances and the flexible gooseneck allows for easy positioning. The mounting clamp features dampening materials to eliminate extraneous vibration, impact, and handling noise. The e 908 B features a locking miniature 3.5mm connector for use with EW series beltpack transmitters; however, the MZA 900 P cylindrical preamplifier is included and terminates to a standard 3-pin XLR connection, for direct connection to PA systems, consoles, and recording devices.
Wired or Wireless Operation
The e 908 B features a 3.5mm locking mini connection for EW series beltpack transmitters; the included MZA 900 P preamplifier features a 3-pin XLR connector for direct integration with mixer consoles, pre-amplifiers, and recording devices.
Low-Frequency Roll-Off
Switchable low-frequency roll-off filter is available on the MZA 900 P. The roll-off eliminates noise and hum below 125 Hz.
12 dB Pad Switch
The 12 dB pad switch is also located on the MZA 900 P. The Pad provides added headroom and minimizes distortion when capturing audio at excessive levels.
Cardioid Polar Pattern
The cardioid polar pattern provides an even frequency response and excellent directivity.
Gooseneck Mount
The capsule rests on a flexible gooseneck for easy microphone positioning.
Clamp Dampening
The sturdy clamp features dampening materials for reducing vibration and handling noise.
Sennheiser E 908 B Specs
Microphone
Form Factor Instrument Mount
Sound Field Mono
Capsule Condenser
Polar Pattern Cardioid
Orientation End Address
Pad None
High-Pass Filter None
Tone Adjustment None
Indicators None
On-Board Controls None
Windscreen Foam (Included)
Performance
Frequency Range 40 Hz to 20 kHz
Impedance 100 Ohms
Load Impedance 2 Kilohms
Sensitivity 4 mV/Pa
Output Level 30 dB
Connectivity
Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRS Male (Locking, on Attached Cable)
Cable Length 7.22' / 2.2 m
Cable Diameter 0.003" / 0.08 mm
Power
Operating Voltage 12 to 48 V (Phantom Power)
Operating Current Consumption 3 mA (Phantom Power)
Physical
Color Black
Mounting Instrument Clamp (Included)
Dimensions ø: 1.85 x L: 7.6" / ø: 47 x L: 193 mm
Weight 4.94 oz / 140 g
