Transmitter
Display：TFT
Transmission Type：2.4GHz digital frequency
Modulation：Digital modulation
Polar Pattern：Omnidirectional
Antenna：Built-in antenna
Operating Range(without obstacles)：328"(100m)
RF Output Power：<10mW
Sampling Rate：48KHz
Frequency Response：20Hz-20KHz
Signal-to-Noise Ratio：>80dB
Maximum SPL：110dB SPL
Sensitivity：-39±2dB
Audio lnput Connector：Built-in condenser microphone
Power Requirements：Built-in rechargeable lithium-ion battery
Battery Specification：3.85V/495mAh
Charging Connector：Charging contacts
Battery Life：Approx.5 hours(onboard recording enabled) / Approx.8 hours(onboard recording disabled)
Memory：8GB
Weight：1.06oz(30g)
Dimensions：φ1.85"×0.49"(φ47mm×12.5mm)
Operating Temperature：0℃ to +50℃
Storage Temperature：-10℃ to +50℃

Receiver
Transmission Type：2.4GHz digital frequency
Modulation：Digital modulation
Antenna：PIFA
Operating Range：Up to 100m (Without Obstacle)
Frequency Response：20Hz-20kHz
Audio Output：RXUC: USB-C digital output / RXDi: iOS Lightning digital output
Power Requirements：Powered by an external device
Weight：RXUC:11.3g / RXDi:11.2g
Dimensions：57.45mm×22.88mm×8mm
Operating Temperature：0℃ to +50℃
Storage Temperature：-10℃ to +50℃

Charging Case
Battery Voltagel Capacity：3.7V/ 3000mAh
Charging Time：Approx.2.5hours
Charging Connector：USB-C port (5V/3A)
Times for Charging Microphone：2times (2*TX)
Weight：193.8g
Dimensions：138.50mm×66.58mm×34.38mm
Operating Temperature：0℃ to +50℃
Storage Temperature：-10℃ to +50℃

Packing List
BlinkMe TX Transmitte *2
BlinkMe RXUC Receiver *1
BlinkMe RXDi Receiver *1
BlinkMe CC Charging Case *1
Magnetic Clip *2
Magnet *2
Fur Windshield *2
USB-A to USB-C Cable *1
USB-C Male to 3.5mm TRS & USB-C Female Audio Cable *1
Screen Protector for Transmitter *2