CELESTION TF 1018 - Zvučnik
Garantujemo najnižu cenu!
This bass and mid range driver is suitable for use in 2-way systems and provides a great price/performance ratio.General specificationsNominal diameter (mm/in) 254/10Power Rating (AES, W rms) 100Nominal impedance (?) 8Voice coil diameter (mm/in) 44.5/1.75Magnet type CeramicMagnet weight (kg/oz) 0.88/31Chassis type Pressed steelSensitivity (dB) 96Frequency range (Hz) 70-6000Coil material Round copperFormer material Round copperCone material Kevlar loaded paperSurround material Cloth-sealedSuspension SingleXmax (mm/in) 2.0/0.08Gap depth (mm/in) 6.0/0.24Voice coil winding width (mm/in) 10.0/0.39Small Signal ParametersSd (m2/in2) 0.035/53.69D (m/in) 0.21/8.27Fs (Hz) 70Mmt (g/oz) 26.31/0.93Mmd (g/oz) 22.66/0.80Qms 7.64Qes 0.66Qts 0.61Re (?) 5.8Vas (lt/ft3) 32.6/1.15BI (Tm) 10.10Cms (mm/N) 0.2Rms (kg/s) 1.5Mounting InformationOverall diameter (mm/in) 256/10.08Overall depth (mm/in) 102/4.02Cut-out diameter (mm/in) 229/9.02Mounting slot dimensions (mm/in) 6 x 8/0.24 x 0.31Number of mounting slots 4Mounting slot PCD range (mm/in) 245/9.65Unit weight (kg/lb) 2.4/5.3
This bass and mid range driver is suitable for use in 2-way systems and provides a great price/performance ratio.
General specifications
Nominal diameter (mm/in) 254/10
Power Rating (AES, W rms) 100
Nominal impedance (?) 8
Voice coil diameter (mm/in) 44.5/1.75
Magnet type Ceramic
Magnet weight (kg/oz) 0.88/31
Chassis type Pressed steel
Sensitivity (dB) 96
Frequency range (Hz) 70-6000
Coil material Round copper
Former material Round copper
Cone material Kevlar loaded paper
Surround material Cloth-sealed
Suspension Single
Xmax (mm/in) 2.0/0.08
Gap depth (mm/in) 6.0/0.24
Voice coil winding width (mm/in) 10.0/0.39
Small Signal Parameters
Sd (m2/in2) 0.035/53.69
D (m/in) 0.21/8.27
Fs (Hz) 70
Mmt (g/oz) 26.31/0.93
Mmd (g/oz) 22.66/0.80
Qms 7.64
Qes 0.66
Qts 0.61
Re (?) 5.8
Vas (lt/ft3) 32.6/1.15
BI (Tm) 10.10
Cms (mm/N) 0.2
Rms (kg/s) 1.5
Mounting Information
Overall diameter (mm/in) 256/10.08
Overall depth (mm/in) 102/4.02
Cut-out diameter (mm/in) 229/9.02
Mounting slot dimensions (mm/in) 6 x 8/0.24 x 0.31
Number of mounting slots 4
Mounting slot PCD range (mm/in) 245/9.65
Unit weight (kg/lb) 2.4/5.3