Eighteensound 6ND430 8 ohm - Zvučnik
*Cena sa popustom može da se ostvari ukoliko se plaća gotovinski, virmanom (preko računa) ili odmah debitnom i kreditnom karticom.
Garantujemo najnižu cenu!
- Svetogorska 9, Beograd
Description The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required. The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and mid frequencies are required such as studio monitoring applications. It is also currently used in line array or multiway systems with excellent results. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at a top professional level with an optimum power to weight ratio. A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure. Particular effort was given to the surround shape and material design in order to minimise the resonances on mid range frequencies. The new design, realised with specified rubber based material density, offers a consistent dampening to typical bell modes. The 45 mm voice coil is made from a light-weight aluminum wire and assures linearity and high power handling.A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND430 far more resistant to the corrosive effects of salts and oxidization.
- 92,5 dB SPL 1W / 1m average sensitivity
- 45 mm (1,77 in) aluminum voice coil
- 200 W AES power handling
- Neodymium motor assembly
- Weather protected cone
- Improved heat dissipation via unique basket design
- Ideal for compact two way and multiway systems
Data sheet |
Drawing |
022066N430-6ND430-16.pdf |
Description
The 6ND430 is a 6 inch neodymium woofer designed for low frequency reproduction in 2-way systems or multiway systems where both low weight and high intelligibility are required.
The speaker has been specifically designed for compact reflex enclosures where high quality low-bass and mid frequencies are required such as studio monitoring applications. It is also currently used in line array or multiway systems with excellent results.
The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at a top professional level with an optimum power to weight ratio.
A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure.
Particular effort was given to the surround shape and material design in order to minimise the resonances on mid range frequencies. The new design, realised with specified rubber based material density, offers a consistent dampening to typical bell modes.
The 45 mm voice coil is made from a light-weight aluminum wire and assures linearity and high power handling.
A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND430 far more resistant to the corrosive effects of salts and oxidization.
GENERAL SPECIFICATIONS | |
Nominal Diameter | 152mm (6 in) |
Rated Impedance | 8 Ohm |
AES Power | 200 W |
Program Power (1) | 260 W |
Peak Power (2) | 500 W |
Sensitivity (3) | 92,5 dB |
Frequency Range (4) | 63 ÷ 5500 Hz |
Power Compression @-10dB (5) | 1,0 dB |
Power Compression @-3dB | 1,5 dB |
Power Compression @Full Power | 2,9 dB |
Max Recomm. Frequency | 3000 Hz |
Recomm. Enclosure Volume | 10 ÷ 40 lt. (0,35 ÷ 1,41 cuft) |
Minimum Impedance | 6,1 Ohm at 25°C |
Max Peak To Peak Excursion | 22 mm (0,87 in) |
Voice Coil Diameter | 44 mm (1,75 in) |
Voice Coil Winding Material | aluminum |
Suspension | Single roll, Rubber |
Cone | Curvilinear, Paper |
THIELE SMALL PARAMETERS (6) | |
Fs | 61 Hz |
Re | 5.5 Ohm |
Sd | 0,0133 sq.mt. (20,6 sq.in.) |
Qms | 6.5 |
Qes | 0.28 |
Qts | 0.27 |
Vas | 12.6 lt. (0,4 cuft) |
Mms | 13,3 gr. (0,03 lb) |
BL | 10.0 Tm |
Linear Mathematical Xmax (7) | ± 5 mm (±0,20 in) |
Le (1kHz) | 0.28 mH |
Ref. Efficiency 1W@1m (half space) | 92 dB |
MOUNTING INFORMATIONS | |
Overall diameter | 162 mm (6,38 in) |
N. of mounting holes | 4 |
Mounting holes diameter | 5,5 mm (0,22 in) |
Bolt circle diameter | 170 mm (6,69 in) |
Front mount baffle cutout ø | 148 mm (5,38 in) |
Rear mount baffle cutout ø | 148 mm (5,38 in) |
Total depth | 73 mm (2,87 in) |
Flange and gasket thickness | 9,5 mm (0,37 in) |
Net weight | 1,25 kg (2,76 lb) |
Shipping weight | 1,8 kg (3,97 lb) |
CardBoard Packaging dimensions | 170 x 170 x 80 mm (6,69 x 6,69 x 3,15 in) |
FREE AIR IMPEDANCE MAGNITUDE CURVE