Features

33000 Lumens – Excellent light quality with a uniform field and 6000K color temperature
1:5 zoom - Continuous and fast
Internal barndoor system – 1 pair of indexing shutters
CMY – Vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green and deep blues
Linear CTO – Daylight to tungsten CCT control and expansion of the CMY palette
7-slot color wheel – Static colors and correction filters for added color choice and bump effects
Dimmer and shutter - Combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades
Iris – Fast and tight iris with adjustable dynamic effects, complementing the barndoor system
Diverse strobe effects

Specifications

Physical
Length: 472 mm (18.6 in.) base 566 mm (22.3 in.) head
Width: 473 mm (18.6 in.) 335 mm (13.2 in.) base
Height: 732 mm (28.8 in.) head straight up 749 mm (29.5 in.) maximum
Weight: 34.1 kg (75.2 lbs.)
Minimum center-to-center distance in side-by-side installation: 650 mm (25.6 in.)
Dynamic Effects
Color mixing: CMY, independently variable 0 - 100%
Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation, random color
Beam shaping: Internal barn doors, continuously variable opening, indexed rotation
Iris: 0 - 100%, pulse effects
Zoom: Motorized
Color temperature control: CTO, variable 6000 - 3200 K
Mechanical dimmer/shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout
Dimming options: Choice of four dimming curves
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring
Control and Programming
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
16-bit control: Dimmer, pan, tilt
DMX channels: 18/24
Receiver: Opto-isolated RS-485
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Firmware update: USB memory device or USB/DMX hardware interface over DMX link
Optics
Zoom range: 13.5° - 59° (1:5)
Color temperature: 6000 K
Output: 33,000 lumens
Photometric Data
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Lamp
Type: 1000 W short-arc discharge
CRI (Color rendering index): >85
Average lifetime: 750 hours
Socket: PGJX36
Ballast: Electronic
Approved lamps: Osram Lok-it! 1000/PS Brilliant, Osram Lok-it! 1000W/PS VS1, Philips MSR Gold MiniFastFit 1000W
Service Utilities
Fixture identification: User-settable fixture ID number
Construction
Housing: UV-resistant fiber-reinforced composite
Color: Black
Reflector: Glass, cold light
Protection rating: IP20
Installation
Mounting points: Eight quarter-turn locking points
Orientation: Any
Minimum distance to combustible materials: 0.3 m (1.0 ft.)
Minimum distance to illuminated surfaces: 3.4 m (11.2 ft.)
Connections
AC power input: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR
USB memory devices: USB host socket
Electrical
AC power: 120-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 16.2 A
Power Factor: 0.99 @ 120 V / 208 V / 230 V / 240 V
Typical current draw: 10.3 A @ 120 V , 5.8 A @ 208 V , 5.2 A @ 230 V , 5.0 A @ 240 V *
Power Consumption
Typical: 1225 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.

Thermal
Cooling: Filtered forced air (temperature-regulated, low noise)
Total heat dissipation (calculated, +/- 10% at 120 V, 60 Hz): 4180 BTU/hr
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Maximum surface temperature, steady state, at 40° C ambient: 150° C (302° F)
Environmental
RoHS: Compliant
REACH: Compliant
WEEE: Compliant
Proposition 65: Compliant
Efficacy (max output): 28
LWR*: 967 lm/kg (438 lm/lb)
LWR = Lumen-to-Weight Ratio