D&R AXITE
The new AXITE (based on the AXUM platform) is a new modular completely preprogrammed platform that can grow with you and your organization any time, any moment.
I/O cards can be shared between systems and if you have decided to use the AXITE as your main mixer you can be sure to have invested in a future proof product.
The AXITE can be used for small local 6 fader desktop use as well as large scale (128 processing channels max) production work and everything in between.
Imagine a console where you can decide yourself what a switch/encoder or fader will do for you. Not possible?
With the AXITE this is possible and... you can do that yourself by selecting a function out of hundreds of functions simply selectable from a database in your AXITE/AXUM browser.
You want 2 studios to share the same I/O cards? buy two control surfaces (with their own CRM sections) put them in different rooms and share over your LAN the same I/O rack, no problem for the AXITE/AXUM platform.
Hardware purchasing choices are straightforward:
Rack ONE accepts a maximum of 21 I/O single slot cards.
Rack TWO accepts a maximum of 37 I/O single slot cards.
features
- 6 to 126 Alps faders
- Faders can be used for channel faders and buss master faders
- Scalable On-Air/Production Console
- Separated control surfaces and I/O racks
- Control surfaces connected by Ethernet.
- Internal website for console setup.
(already pre-programmed in the factory)
- I/O matrix of 1280 x 1280
- 16 stereo summing buses (Prog, Sub, Cue, Comm, 12x Aux) and
4 stereo monitoring buses
- 16 Talk back buses
- 4 stereo monitor buses per DSP card
- Inputs can directly assigned to the outputs
- 128 Stereo DSP channels max (4 DSP Cards inserted)
- 6 band comprehensive EQ
- Enhanced Voice Processing built in
- Processing / Module & Console presets
- Direct outputs available
- Converters are 24bit / 96kHz
- On-Air & Phone indication on screen
- Phase meters on modules, buses, monitor
- High precision Broadcast Clock
- Redundant power supply optional for both Control Surface
and I/O rack
- Dante compatible
CONTROL SURFACES
The AXITE is completely modular and allows selection out of 2 control surfaces.
We can supply a 6 fader drop through main frame and a 6 fader extender frame to built any number of faders you need
As technology moves forward and your needs are growing, even our high end AXUM fader panels can be added to the system.
I/O-cards
With the D&R AXITE’s modular concept, our MambaNet™ protocol controls the primary portion of the I/O rack. Each I/O card is shared in the network and can be controlled from the network.
The I/O cards together with the rack will behave as a large Matrix in the network. Every inserted DSP card gives you 32 stereo channels with full control over the EQ and dynamics of the audio, a maximum of 4 DSP cards is accepted.
- The huge amount of in- and outputs per card could not be designed with a
dedicated (jack/Cinch/XLR) connector in the space available on the front of
the card.
- By using standard STP cables in every input and output module a compact and
neat cabling can be achieved. Due to standardization, changes in wiring can be
achieved very easily without the need for soldering.
- These low cost Cat-5 cables are ready made available from us or from your
nearest computer store starting at lengths of 30cm. up to 20 meters.
specs
General:
Matrix up to 1280x1280.
Word clock input or internal generator.
Synchronization
Word clock input or internal generator.
32 kHz, 44.1 kHz, 48 kHz.
Word clock out 75R.
Selectable 75 Ohm termination on word clock input.
Dimensions:
AXITE 6 fader Main unit for drop through mounting.
Width: 375 mm
Height: 335 mm
Drop through hole: 350 mm x 310 mm
Front Panel Thickness: 2 mm
AXITE 6 fader EXTender.
Width: 255 mm
Height: 335 mm
Drop through hole: 230 mm x 310 mm
Front Panel thickness: 2 mm
I/O Cards:
DSP
32 bit floating point processing.
32 stereo channels.
32 mixing busses.(Program|Sub|Cue|Comm|24x Aux)
6 band fully parametric equalizer.
MIC
Electronically balanced, 2Kohm.
Analog input sensitivity -70dBu up to +20dBu (Pad).
CMRR MIC inputs: 85dB @ 1kHz, maximum gain.
Optional transformer balancing.
Line input
Electronically balanced, 10kOhm.
Input sensitivity +6 dBu, maximum +26dBu.
CMRR Line inputs: 50dB @ 1kHz, maximum gain.
Optional transformer balancing.
Line Output
Electronically balanced, <47Ohm.
Output level +6dBu, maximum output level +26 dBu.
Optional transformer balancing.
I/O Cards:
CRM Output
Electronically balanced, <47 Ohm.
Output level +6dBu, maximum output level +26 dBu.
Optional transformer balancing.
Headphones out:
- 80mW into 600R.
- minimum load 8 Ohm.
Digital Inputs/Output
Sample rate conversion.
AES/EBU (AES3), S/P-DIF (cinch or optical).
16/20/24 bit.
THD+N: -105dBfs @1kHz, 0 dBFS.
Input/Output impedance: 110 Ohm (XLR) / 75 Ohm (Cinch).
Output level: 2 to 5 volt
GPI
5V TTL, 100 kOhm input impedance
GPO
Selection of optical isolated relay or 5V TTL output
Optical isolated relays is max: 50V at 200mA
