TASCAM DR-70D - Filmski snimač
*Cena sa popustom može da se ostvari ukoliko se plaća gotovinski, virmanom (preko računa) ili odmah debitnom i kreditnom karticom.
Garantujemo najnižu cenu!
The DR-70D from TASCAM is the ultimate audio recording solution for filmmakers. Four balanced XLR mic inputs meet the requirements of production sound, from professional users to indie DSLR shooters. The compact format can be mounted either above or below a camera, and a pair of built-in microphones can capture sound on-set. The interface is designed for quick adjustment, with additional features to keep recording levels under control.
Four XLR mic inputs with phantom power are included on the DR-70D, enough to cover busy scenes. The High-Quality HDDA(High Definition Discrete Architecture) Mic Preamps include 64dB of gain for quiet performances, and all four inputs have individual gain controls. Each input has a limiter and low cut filter available for controlling volume. Also included is Dual Recording mode, which records a safety copy of your audio at a lower level to prevent distorted takes. Quality components like 5532 op amps are used throughout for the clearest audio possible.
Tracks on the DR-70D are captured to SD card, SDHC or SDXC media – up to 128GB cards are supported. The recorder has tripod mounts on the top and bottom of the unit, allowing it to be mounted on a camera, a follow-focus cage, or used standalone. Other production friendly features include a slate tone, low-noise buttons, a powerful headphone output, and standard AA battery power.
Uniquely designed for the needs of filmmakers, television producers, advertisers, and documentarians, the DR-70D packs multitrack recording into a package compact enough to use with any camera.
DR-70D SPECIFICATIONS
Recording media | SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB) |
Recording format | |
WAV | 44.1k / 48k / 96k Hz, 16bit / 24bit |
BWF | 44.1k / 48k / 96k Hz, 16bit / 24bit |
Number of channels | 4-channel (stereo × 2, mono × 4) |
Analog audio input | |
1/L, 2/R, 3/L, 4/R connectors | |
Connector | XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4")TRS standard jack |
Set to "MIC / MIC+PHANTOM" | |
Input impedance | 2k ohms |
Phantom power | 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH) |
Maximum input level | 0dBu |
Minimum input level | -72dBu |
MIC input gain | TRIM MAX |
LOW | +21dB |
MID | +36dB |
HIGH | +51dB |
HI + PLUS | +63dB |
Set to "LINE" | |
Input impedance | 10k ohms or more |
Standard input level | +4dBu |
Maximum input level | +20dBu |
1/2 connector | |
Connector | 3.5mm(1/8")stereo mini jack (this connector can be supplied plug-in power) |
Input impedance | 10k ohms |
Maximum input level | +10dBV |
Minimum input level | -50dBV |
MIC input gain | TRIM MAX |
LOW | +3dB |
MID | +11dB |
HIGH | +26dB |
HI + PLUS | +38dB |
CAMERA IN connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Input impedance | 10k ohms |
Standard input level | -10dBV |
Maximum input level | +6dBV |
Analog audio output | |
LINE OUT connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Output impedance | 200 ohms |
Standard output level | -10dBV |
Maximum output level | +6dBV |
CAMERA OUT connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Output impedance | 200 ohms |
Standard output level | -40dBV |
Maximum output level | -24dBV |
PHONES connector | |
Connector | 3.5mm(1/8")stereo mini jack |
Maximum output level | 20mW + 20mW |
USB | |
Connector | Micro-B type |
Format | USB2.0 HIGH SPEED mass storage class |
REMOTE | |
Connector | 2.5mm TRS jack |
Power | 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
Power consumption | 5.0W |
Continuous operation time | 2ch WAV, 44.1kHz, 16bit rec Phantom power not used |
DR-70D Battery Life (hours:minutes) | |
Alkaline batteries (EVOLTA) | About 6:00 : When XLR/TRS input selecte (Phantom off) About 3:30 : When XLR/TRS input selecte (Phantom on) About 11:00 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop) | About 6:15 : When XLR/TRS input selecte (Phantom off) About 3:15 : When XLR/TRS input selecte (Phantom on) About 10:30 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop pro) |
About 7:45 : When XLR/TRS input selecte (Phantom off) About 4:45 : When XLR/TRS input selecte (Phantom on) About 14:15 : When 3/4 MIC (Built-in Mic) selected |
DR-70D + BP-6AA | *BP-6AA is using the alkaline batteries (EVOLTA). |
Alkaline batteries (EVOLTA) | About 13:00 : When XLR/TRS input selecte (Phantom off) About 7:30 : When XLR/TRS input selecte (Phantom on) About 25:30 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop) | About 12:45 : When XLR/TRS input selecte (Phantom off) About 7:45 : When XLR/TRS input selecte (Phantom on) About 24:45 : When 3/4 MIC (Built-in Mic) selected |
NI-MH batteries (eneloop pro) |
About 14:30 : When XLR/TRS input selecte (Phantom off) About 8:45 : When XLR/TRS input selecte (Phantom on) About 27:00 : When 3/4 MIC (Built-in Mic) selected |
Dimensions | 6.65(W)×2.2(H)×4.2(D)in 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached) |
Weight | 1.37lb ( including batteries) / 1.16lb (without batteries ) 625g ( including batteries) / 530g (without batteries ) |
Operating temperature | 0 to 40˚C |
Standard accessories | USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty) |
Audio performance | |
Frequency response | 20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48k Hz, JEITA) 20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
Distortion | 0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96k Hz, JEITA) |
S/N ratio | 92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96k Hz, JEITA) |
Equivalent input noise | -120dBu or less |
Computer compatibility | |
Windows | |
OS | Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1 |
CPU | Pentium 300MHz or more |
RAM | 128MB or more |
USB | recommended: USB2.0 |
Macintosh | |
OS | Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4), Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8), OS X Mavericks(10.9) |
CPU | Power PC, iMac, G3, G4 266MHz or more |
RAM | 64MB or more |
USB | recommended: USB2.0 |
Recording Duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
File format(recording setting) | SD/SDHC card capacity(hours:mintes) | ||||
1GB | 2GB | 4GB | 8GB | ||
WAV/BWF 16bit(STEREO) | 44.1kHz | 1:41 | 3:22 | 6:44 | 13:28 |
48kHz | 1:33 | 3:06 | 6:12 | 12:24 | |
96kHz | 0:46 | 1:33 | 3:06 | 6:12 | |
WAV/BWF 24bit(STEREO) | 44.1kHz | 1:07 | 2:15 | 4:30 | 9:00 |
48kHz | 1:02 | 2:04 | 4:08 | 8:16 | |
96kHz | 0:31 | 1:02 | 2:04 | 4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.