Tascam FR-AV2
Šifra: 19324
51.480,00 rsd
42.900,00 rsd (Bez PDV-a)
Iznos rate:
Prikazana cena je za komad.
Garantujemo najnižu cenu!
Professional 2-Channel Audio Recorder
Specifications
Recorder specifications | |
---|---|
Recording media | microSD (64 MB – 2 GB) microSDHC (4–32 GB) microSDXC (48–512 GB) |
Recording/playback format | WAV (BWF) |
Sampling frequency | 48 kHz, 96 kHz, 192 kHz |
Quantization bit depth | 24 bit, 32 bit float |
Input channels | 2 |
Maximum number of recordable tracks | 2 |
Analogue audio inputs and outputs | |
---|---|
Microphone input (balanced) | XLR-3-31 (1: GND, 2: HOT, 3: COLD) |
Maximum input level | +4 dBu |
Minimum input level | –76 dBu |
Gain adjustment range | 0–50 dB |
Input impedance | ≥2 kΩ |
Phantom power | 24 V, 48 V |
Line input (balanced) | 6.3-mm standard TRS jacks (Tip = HOT, Ring = COLD, Sleeve = GND) |
Maximum input level | +24 dBu |
Nominal input level | +4 dBu (GAIN at minimum) |
Input impedance | ≥8 kΩ |
Line/timecode input (unbalanced) | 3.5-mm stereo mini jack |
Maximum input level | 1 dBV |
Nominal input level | –19 dBV (GAIN at minimum) |
Minimum input level | –79 dBV |
Input Impedance | ≥6 kΩ (plug-in power off) ≥1.6 kΩ (plug-in power on) |
Plug-in power | 2.5 V, 5 V |
Analogue audio outputs | |
---|---|
Line/timecode output (unbalanced) | 3.5-mm stereo mini jack |
Maximum output level | +6 dBV |
Nominal output level | –10 dBV (–16 dBFS) |
Output impedance | 210 Ω |
Headphones output | 3.5-mm stereo mini jack |
Maximum output power | 50 mW + 50 mW (THD+N <0.1 % at 32 Ω) |
Recommended headphones impedance | 16–400 Ω |
USB | |
---|---|
Connector | USB Type-C |
Transfer format | USB 2.0 HIGH SPEED |
Device Class | Mass Storage Class USB Audio Class 2.0 |
USB Audio | |
Sampling frequency | 48 kHz, 96 kHz |
Quantization bit depth | 24 bit, 32 bit float |
Number of inputs/outputs | 2/2 channels |
Timecode input/output | |
---|---|
Timecode input | 3.5-mm stereo mini jack (Tip: Timecode IN, Ring: Not used, Sleeve: GND) |
Input impedance | ≥10 kΩ |
Signal level range | 0.5 to 5 Vpp |
Timecode output | 3.5-mm stereo mini jack |
LTC selected | |
Terminal assignment | Tip: Timecode, Ring: Not used, Sleeve: GND |
Output impedance | 600 Ω |
Output level | 2 Vpp |
MIC LEVEL selected | |
Terminal assignment | Tip: Timecode, Ring: right channel, Sleeve: GND |
Output impedance | 110 Ω |
Output level | 40 mVpp |
Audio performance | |
---|---|
EIN (equivalent input noise, mic preamp) | ≤–127 dBu |
Frequency response (input jacks to PCM data) | 48 kHz: 20 Hz – 20 kHz, +0 dB / –0.5 dB 96 kHz: 20 Hz – 40 kHz, +0.5 dB / –1 dB 192 kHz: 20 Hz – 60 kHz, +0.5 dB / –3 dB |
Dynamic range (input jacks to PCM data) | ≥132 dB (20-kHz SPCL LPF, A-weighting) |
Total harmonic distortion ratio (THD+N, input jacks to PCM data) | ≤0.02 % (1 kHz sine wave, −1 dBFS input, GAIN at minimum, 20-kHz SPCL LPF) |
Battery operation time | |
---|---|
Conditions | Stereo recording at 48 kHz, both input jacks used, continuous operation, in hours:minutes (JEITA CP-2905) |
Alkaline battery (Evolta) | |
09:00 | Phantom power off, 24-bit resolution |
04:30 | Phantom power on (48 V, 2 × 3 mA), 32-bit float |
NiMH battery (Eneloop) | |
08:30 | Phantom power off, 24-bit resolution |
05:30 | Phantom power on (48 V, 2 × 3 mA), 32-bit float |
Lithium battery (Energizer Ultimate Lithium) | |
15:00 | Phantom power off, 24-bit resolution |
10:00 | Phantom power on (48 V, 2 × 3 mA), 32-bit float |
Note: Operation times may vary depending on the microphones being used. |
Power supply and other specifications | |
---|---|
Power sources | 3 AA batteries (alkaline, NiMH, lithium-ion) USB bus power TASCAM PS-P520U AC adapter (sold separately) |
Power consumption | 3.8 W (maximum) |
Dimensions (W x H x D, overall) | 99 mm × 80 mm × 40 mm |
Weight | 267 g (including batteries) 195 g (without batteries) |
Operating temperature range | 0–40 °C |
Included items | Safety guide, Tascam ID registration guide |
Ocena: