The V67G is a side-address mic with a 1" gold-sputtered large diaphragm capable of capturing plenty of detail. Its somewhat wide cardioid polar pattern yields generous pickup at the front and sides of the mic while offering significant rejection of sound at the rear, which helps lessen the presence of room noise in home recordings. To further optimize the V67G for vocal sessions, accessories such as a foam windscreen, pop filter, and shockmount are available separately.

Designed for Vocals
Designed mainly for vocals, the V67G combines Class-A FET circuitry and a transformer-coupled output resulting in a pure and warm sound that's akin to the mellow vibe of an old-school tube mic. Rather than opting for transparency, its frequency response features a thicker midrange that adds body to vocals.
Large-Diaphragm Condenser Capsule
The V67G has a 1" gold-sputtered diaphragm and a fairly wide cardioid pickup pattern that is least sensitive to sound behind the mic. Large-capsule condensers such as the V67G are very sensitive, readily revealing subtle sonic details.
Phantom Powered
Due to its balanced XLR output and solid-state condenser electronics, the V67G should be connected via an XLR mic cable (available separately) to the mic input of a device that can supply 48V phantom power.
Features at a Glance
1" gold-sputtered diaphragm
Class-A FET circuitry
Transformer-balanced output
30 Hz to 20 kHz frequency response
130 dB maximum SPL
48V phantom powered
XLR 3-pin connector
Includes stand mount and zipper pouch

MXL V67 Specs
Microphone
Primary Applications Studio Recording
Form Factor Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources Vocals
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Condenser
Diaphragm 1.0" / 25 mm
Polar Pattern Cardioid
Orientation Side Address
Circuitry Solid-State
Pad None
High-Pass Filter None
Tone Adjustment None
Gain Adjustment None
Indicators None
On-Board Controls None
Windscreen None
Performance
Frequency Range 30 Hz to 20 kHz
Maximum SPL 130 dB SPL (.5% THD)
Impedance 200 Ohms
Sensitivity -36.5 dBV/Pa
Signal-to-Noise Ratio 74 dB A-Weighted
Equivalent Noise Level 20 dB A-Weighted
Connectivity
Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Headphone Connector None
Power
Bus Power None
Operating Voltage 48 V ± 4 V (Phantom Power)
Operating Current Consumption 3 mA
Physical
Color Green
Mounting Mic Clip/Stand Adapter (Included)
Included Case Zipper Pouch
Included Filters None
Dimensions ø: 1.85 x L: 7.24" / ø: 4.7 x L: 18.39 cm
Weight 1.3 lb / 0.59 kg